All I want for Christmas is a really precise reloading press

[Dmay]

Can't see in the pics but: do you have, or could you incorporate, some threaded something under the shell-holder plate to keep it higher when working on smaller cartridges?.....versus using the full stroke of the press for the smaller rounds?
Not a big deal, I know, just imagining using it. (Being down to one or two presses would be neat)

[alberta tactical rifle]

Can't see in the pics but: do you have, or could you incorporate, some threaded something under the shell-holder plate to keep it higher when working on smaller cartridges?.....versus using the full stroke of the press for the smaller rounds?
Not a big deal, I know, just imagining using it. (Being down to one or two presses would be neat)

Already ahead of you on that 1.
We have a "ram stop" that will limit the travel of the ram to about 50%. By simply reversing the handle it then puts you with the handle lever back in the upright position so you are back to using the top of the stroke.
For single stage, only 1 press would be needed to do everything. I have several presses now to sell as now I can cover absolutely every situation with my Dillon for the spray and pray ammo and the ACCU-MAXX for everything else from 25 ACP to 20MM:D

[TSE JR]

Very impressive. Great job!

[HKMark23]

Lol, IMHO, ATRS is always sure! Yet another fine product. Good on you guys!

http://www.midsouthshooterssupply.co...sku=0007670000

There is of course no comparison between the 2 presses, ATRS's being far the superior. Thats not the issue. The issue is that the Ultramag is nowhere near 650 bux, "thats all".

[alberta tactical rifle]

http://www.midsouthshooterssupply.co...sku=0007670000

There is of course no comparison between the 2 presses, ATRS's being far the superior. Thats not the issue. The issue is that the Ultramag is nowhere near 650 bux, "thats all".

Being as we are a Redding dealer, and get the best pricing level available from Redding, I do not know nor can explain why some companies elect to sell products WELL BELOW cost. They must be making money somewhere but taking a severe hit on a press and trying to make up the loss somewhere else does not make much sense to me.
Even taking their price into account you still have exchange and customs fees to pay which will escalate that price somewhat.

[stac50bmg]

Hi

is there a link to the ACCU-MAXX press on the web ?

I have an Ultra Mag, very nice press.

Have a Nice Zombie Day

[stac50bmg]

http://www.midsouthshooterssupply.co...sku=0007670000

There is of course no comparison between the 2 presses, ATRS's being far the superior. Thats not the issue. The issue is that the Ultramag is nowhere near 650 bux, "thats all".

SImply unbelievable the price they are putting on their web site.

There must something under that deal.

Best price here is from Alberta Tactical.

There must be some Zombies involved, I have to go there for my next hunt.

Have a nice Zombie day

[alberta tactical rifle]

Hi

is there a link to the ACCU-MAXX press on the web ?

I have an Ultra Mag, very nice press.

Have a Nice Zombie Day

Soon! WE are just waiting for the steel parts to come back from the nitrider.

[alberta tactical rifle]

Do you know the rough square footage needed to operate that press, just rebuilding my reloading room and want get get into 50bmg in the near future , Hopefully still have enough room for this beside my 2 XL650.

Photos of my bench at the shop.
Hopefully that will give you an idea for space.

[Dmay]

Already ahead of you on that 1.
We have a "ram stop" that will limit the travel of the ram to about 50%. By simply reversing the handle it then puts you with the handle lever back in the upright position so you are back to using the top of the stroke.
For single stage, only 1 press would be needed to do everything. I have several presses now to sell as now I can cover absolutely every situation with my Dillon for the spray and pray ammo and the ACCU-MAXX for everything else from 25 ACP to 20MM:D

Sounds great. Well designed, as I should have expected. (But I'm not buying one.........well, not yet.......maybe......)