We are happy to announce that we are now able to provide the full line-up of SPUHR Modular Mounts!

These top of the line mounting solutions have a number of patented features that raise the bar when it comes to the often overlooked part of the rifle system. These mounts have quickly gained the attention of military and special forces units across the globe, and are currently on active duty.






Durability
Solid, one piece design prevents damage to scopes due to flexing during heavy recoil or rough environments. The mount is milled out of one billet of material instead of being screwed together of small parts. Rings are grooved on the inside to provide a better grip of the scope and enabling gluing if desired. Rated for use with .50 BMG.



Scope Rotation
Patent pending solution for indexing the rotation of the scope, using an included tool/gauge to index the scope correctly to the mount and gun. Important since a incorrectly indexed scope will also have a sideways adjusted point of impact.



Mounting Placements
Traditionally lasers have been mounted on the forend of the rifle, a solution with drawbacks. For the same reasons you don’t want your barrel to touch the forend you don´t want the sights to be mounted on the forend. The mounting system have minimum seven interfaces for accessories and the laser can easily be mounted on the mount. This provides the advantage of an undisturbed laser and the weight more central on the gun instead of forward.



Tilt
Mounts can be delivered in various tilts. The tilt is clearly engraved on the mount, in both MIL and MOA.


Accessible and readable dials
The rings are cut 45 degrees instead of horizontal as usual, providing several advantages. The screws holding the parts together are not in the way of the knobs, thus the shooter can quickly determine the settings of the knobs. The rings have index marks on the top and right side, making low knobs more easily readable



Accessories
Possibility of using various accessories such as angle cosine indicator, back up sights, lasers, illuminators, Night vision mounts etc. With traditional mounts this can be achieved only if there is sufficient space on the middle tube for additional rings, which there rarely is. Ideal Scope Mount System have interface surfaces directly on the mount, making it possible to mount accessories either by Picatinny rails or as direct interfaces for certain accessories as angle cosine indicators and red dot sights. A selection of interfaces for popular accessories are available, and others can be made to specification.




Level
The sight mount has an integral level included inside the mount. Ensuring the rifle is level for each shot is critical in maintaining long-distance accuracy. The location of the bubble allows for the shooter to check level without changing cheekweld.




See here for more info/ordering

Priced at $485, available in a wide variety of elevations, ring sizes, and even rifle-specific mounts.