Results 1 to 2 of 2

Thread: A+++ Service!! Thanks Jerry!

  1. #1
    CGN Regular klink1983's Avatar
    Join Date
    Feb 2005
    Location
    Ontario Soviet Socialist Republic
    Posts
    486

    A+++ Service!! Thanks Jerry!

    This post is long in the making, sorry for the delay Jerry (as per our emails).

    From start to finish Jerry was up front and honest about shiping time, what this stock will do for me, how I should install it....and he did try to upsell me on other items but was not at all pushy about it. This purchase was just a stock to compliment my rifle, but when funds become available I will be dealing with him for a full custom build.

    He has a plethora of knowledge that he is willing to share, and has no problems answering numerous emails from customers like myself who are relatively new to long distance precision shooting. I highly reccommend dealing with Jerry for any purchases ranging from bolt on parts to consultation and part sourcing for any build you can possibly think of.

    RIFLE: Rem700AACSD chambered in .308, choate tactical stock, 20MOA base topped with Vortex HST Viper in MRAD, 4-16x44mm, the rest of it is factory for now.

    TARGET: Shot at Frontenac Shooting Complex in Kingston ON, 15Dec2013, -5'C overcast, 300 yards prone. This was during a load testing session to confirm a couple recipes. What you see is 168gr Amax seated to 2.83", 41.5gr of H4895, Norma brass, CCI200 Primer. This was shot at 300yards. Although not the best shooting, this is a marked improvement from the Hogue overmold stock that my rifle came with.....which is for sale!!!!



    Last edited by klink1983; 01-23-2014 at 03:49 PM.

  2. #2
    Supporting Dealer
    Join Date
    Mar 2004
    Location
    Summerland, BC
    Posts
    16,580
    Nice rifle and very happy that you are enjoying the final result.

    The vertical on that group is quite tight so you are certainly shooting well.

    Enjoy the rifle and let me know if I can help further.

    Jerry


    Check out my Facebook page... Mystic Precision Inc

    Email me at mysticprecision@gmail.com or PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •