Results 1 to 7 of 7

Thread: Custom built 870 shotgun by S&J Hardware 14 inch bbl AR15-870 CQB STOCK SYSTEM

  1. #1
    Business Member badboybeeson's Avatar
    Join Date
    Mar 2004
    Location
    East ontario
    Posts
    15,444

    Custom built 870 shotgun by S&J Hardware 14 inch bbl AR15-870 CQB STOCK SYSTEM

    The custom built 870 shotguns were custom built and tuned by us.
    As many of us know things are not “made like they use to” to that point the tried and true Remington 870 shotgun is not what it used to be.
    The 870 shot gun is the #1 selling shotgun of all times, will over 11 million sold, and estimated 7million still in use, it has proven its self to be a simple easy to use firearm.
    We have built these custom 870 shotgun almost from the ground up.


    Built on Norinco HP9-1

    This has to be my best action job yet.
    Note this was a shop and demo gun, we use to take photos of products and has approx 50-75 fired

    Striped and honed action. Smoothed and polished action inside and out including magazine tube.
    Stripped, honed and bead blasted pump forend.
    Stripped polished and bead blasted all small parts ,trigger pins, stock nut, and forend nut
    Bead blast and Mil spec phosphate finish every steel part by it,s self
    KG GunKote OD green.
    Hone and polish chamber and bore.
    Bore out and install Houge forend
    Install 4140 steel over sized safety button
    Install No jam bright ORANGE machined magazine follower
    Cut install and test +power high quality magazine spring (650,000 cycle life)
    Fit and install AR15-870 cqb stack system.
    Supply 1x 6 shot black ( Detachable shot shell carrier) (customer to install as they wish)
    14 inch bbl fixed Cly bore
    Non restricted firearm

    As this is a demo gun it has a few marks on the rail from optics and a few marks on the stock adaptor sling inset, from changing sling

    $749.99




    Last edited by badboybeeson; 04-27-2014 at 03:53 PM.

  2. #2
    CGN Regular 00aught's Avatar
    Join Date
    Oct 2013
    Location
    Canada
    Posts
    675
    Quote Originally Posted by badboybeeson View Post
    The custom built 870 shotguns were custom built and tuned by us.
    As many of us know things are not “made like they use to” to that point the tried and true Remington 870 shotgun is not what it used to be.
    The 870 shot gun is the #1 selling shotgun of all times, will over 11 million sold, and estimated 7million still in use, it has proven its self to be a simple easy to use firearm.
    We have built these custom 870 shotguns almost from the ground up.
    We have taken new in box Remington 870 Tactical shotguns and completed the following work

    Built on Norinco HP9-1


    This has to be my best action job yet.
    Note this was a shop and demo gun, we use to take photos of products and has approx 50-75 fired

    Striped and honed action. Smoothed and polished action inside and out including magazine tube.
    Stripped, honed and bead blasted pump forend.
    Stripped polished and bead blasted all small parts ,trigger pins, stock nut, and forend nut
    Bead blast and Mil spec phosphate finish every steel part by it,s self
    KG GunKote OD green.
    Hone and polish chamber and bore.
    Bore out and install Houge forend
    Install 4140 steel over sized safety button
    Install No jam bright ORANGE machined magazine follower
    Cut install and test +power high quality magazine spring (650,000 cycle life)
    Fit and install AR15-870 cqb stack system.
    Supply 1x 6 shot black ( Detachable shot shell carrier) (customer to install as they wish)
    14 inch bbl fixed Cly bore
    Non restricted firearm

    As this is a demo gun it has a few marks on the rail from optics and a few marks on the stock adaptor sling inset, from changing sling

    $749.99




    Is it a remington or Norinco?

  3. #3
    CGN Regular HunterKillerV's Avatar
    Join Date
    Apr 2012
    Location
    Calgary, Alberta
    Posts
    117
    Quote Originally Posted by 00aught View Post
    Is it a remington or Norinco?
    Learn to read.
    If your only political involvement is voting, you don't actually care. Move aside and let the people be heard.

    Get involved in your community!

  4. #4
    CGN Ultra frequent flyer Can-down's Avatar
    Join Date
    Apr 2005
    Location
    B.C.
    Posts
    23,702
    Quote Originally Posted by HunterKillerV View Post
    Learn to read.
    Good advice. It looks like BAd boy edited the OP.
    If you read 00aught's quote of the original post...... It was a bit confusing.

    We have taken new in box Remington 870 Tactical shotguns and completed the following work

    Built on Norinco HP9-1

  5. #5
    Business Member badboybeeson's Avatar
    Join Date
    Mar 2004
    Location
    East ontario
    Posts
    15,444
    Quote Originally Posted by Can-down View Post
    Good advice. It looks like BAd boy edited the OP.
    If you read 00aught's quote of the original post...... It was a bit confusing.
    Yep my bad I forgot to edit the generic post we have been using for our shotgun builds.

    It is a norninco HP9_1

  6. #6
    CGN Ultra frequent flyer Can-down's Avatar
    Join Date
    Apr 2005
    Location
    B.C.
    Posts
    23,702
    Do you guys ever install rem flex tabs on these builds?
    Or are they not needed on chinese parts?

  7. #7
    Business Member badboybeeson's Avatar
    Join Date
    Mar 2004
    Location
    East ontario
    Posts
    15,444
    Quote Originally Posted by Can-down View Post
    Do you guys ever install rem flex tabs on these builds?
    Or are they not needed on chinese parts?
    I have done, when the parts are able to be had at the right price, or customer has asked.
    the issues is buying Remington parts as a dealer in Canada is more then they retail for in the US some times.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •