Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Burris: Eliminator III, MTAC Scopes, AR-Sights, AR Riflescopes & AR-P.E.P.R. Mounts

  1. #1
    Business Member plainSight Solutions's Avatar
    Join Date
    Dec 2009
    Posts
    915

    Burris: Eliminator III, MTAC Scopes, AR-Sights, AR Riflescopes & AR-P.E.P.R. Mounts



    PLEASE NOTE THE FOLLOWING
    • prices do not include applicable taxes, shipping or insurance.
    • EMT, money order, Visa and Mastercard accepted.
    • to order: PM here on CGN, email at precisionoptics@hotmail.com, call our store at 250-747-4636, or call/text 250-991-1406
    • please note that prices can change without notice
    Burris Eliminator III



    Extreme Accuracy at Extreme Ranges
    The Eliminator III pushes the envelope: the sleek, lightweight design is robust and ready for action, providing range-finding, angle, ballistic, and windage compensation for targets out to 1,200+ yards.

    Say goodbye to hurried transitions between your rifle and rangefinder as game covers terrain. No second is wasted with the built-in rangefinding technology that zeroes in on game out to 1,200 yards and beyond, instantly giving you the perfect aiming point. You can program the Eliminator with your specific ammunition data and it will automatically calculate exact bullet drop, giving you a simple illuminated point of aim. Plus, Eliminator III models feature a built-in inclinometer that adjusts for difficult uphill and downhill shots. Finally, the refined 1/8th MoA elevation and windage adjustment, enables the shooter to set a very precise zero.


    Ballistic, Angle and Range Compensation


    Precise trajectory compensation is calculated for your exact ammunition, the angle, and range to target. The illuminated aiming point then provides the hold-over adjustment required for the point of aim, even in low-light conditions.

    Burris provides a comprehensive Cartridge List that provides a Drop Number and Ballistic Coefficient for your specific cartridge. Simply enter the Drop Number, BC, and your sight-in distance so your Eliminator can calculate aiming points based on your cartridge. In a split second, the Eliminator factors in the distance, the angle of the shot, the ballistics of your cartridge or load, and presents a lighted dot for the perfect holdover. As the Eliminator III X96 reticle is located in the first focal plane, this technology will function at any magnification.

    Windage Compensation


    While complete wind compensation is not fully automated within the scope, the Eliminator gives the shooter the tools needed to make an accurate hold-off estimate. In addition to distance, the reticle’s digital display will show a 10 MPH Wind Value for your specific cartridge at the indicated range to your target. This Wind Value represents how many dots to hold into the wind for a 10 MPH crosswind. Estimate the actual wind speed and use the 10 MPH Wind Value as a guideline for selecting how many dots to hold into the wind.

    No other riflescope combines this level of quality, technology, accuracy, simplicity, repeatability, and effectiveness in a single package, anywhere near this price. It will greatly increase the distance at which you can be confident in making an ethical shot.

    200120 - Eliminator III 3-12x44mm - $1,799
    200116 - Eliminator III 4-16x50mm - $1,999


    Burris MTAC


    MTAC - Tough. Accurate. Reliable.
    The optical requirements of a tactical shooter wining a 3-gun stage are the same as a hunter stalking dangerous game: a tough scope, superb glare- resistant glass, and a sleek, snag-free profile. The incredibly resilient Burris MTAC riflescopes provide all that and more. With compact models perfect for CQB or big game stalking, to high-power models ideal for mid- to long-range tactical shooting, MTAC has you covered. Featuring high performance glass, solid one-piece tubes, and internal double-spring tension assemblies, you can take your MTAC into the harshest shooting environments. Rest easy – it's covered by the Burris Forever Warranty.

    MTAC 1-4x24mm


    The MTAC 1-4x24mm is an upgrade to the popular Burris Fullfield TAC30 scope.

    The MTAC incorporates higher quality lenses with hi-lume multi-coatings which provide a crisp, clear picture from dusk to dawn. Another major improvement in the MTAC is the independently moving power ring, separate from the ocular bell. This lets the shooter adjust the power range without any visual interruption. Double-spring tension and an oversized ball-joint secure the hand-fitted internal zoom-assembly.

    The 30mm main tube is constructed of aircraft grade 6061T6 aluminum. Each scope is purged with laboratory-grade nitrogen to eliminate internal moisture and sealed with Burris-exclusive quad seals. The adjustment system is positive and repeatable with audible clicks ensuring unfailing shot-to-shot accuracy in all environments.

    The rotary illumination switch is located on the left side of the adjustment turret and features 10 brightness settings in which every setting is protected from any unwanted changes by a solid detent. When you need to eliminate illumination immediately, there is an off position located between each setting.

    The MTAC 1-4x24mm uses the Burris Ballistic CQ reticle (see below for more details) which provides a circular center dot for ultra-fast engagement at close distances, while the smaller dots of the reticle provide trajectory compensation out to 600 yards for many popular 5.56 and 7.62 cartridges.

    The MTAC 1-4x24mm combo combines the MTAC 1-4x24mm, with a Burris FastFire II Reflex Red Dot, and an AR-P.E.P.R. Mounting System for a complete, lightweight, balanced, and very effective shooting package.

    200437 - MTAC 1-4x24mm - $599
    200437FF - MTAC 1-4x24mm combo - $779

    (includes MTAC 1-4x24mm, Burris Fast Fire II Reflex Sight, and Burris AR-P.E.P.R. mount)

    MTAC 1.5-6x42mm



    The bigger brother to the MTAC 1-4x24mm, the MTAC 1.5-6x42mm offers greater magnification and increased light-gathering, with the same great features that make these scopes preferable for the 3-Gun competitor, tactical shooter, or close ranged hunter alike.

    With the Burris Ballistic CQ reticle (see below for more details) and rotary illumination system, the MTAC 1.5-6x42mm will allow the shooter to engage targets from close-range, out to 600 yards, in rapid succession.

    200429 - MTAC 1.5-6x42mm - $599

    Burris Ballistic CQ Reticles


    The Burris Ballistic CQ reticles were developed for competitive shooters, law enforcement, and military applications. They’re fast and accurate, making them perfect for close-range tactical applications and the perfect configuration for the MTAC 1x-4x-24mm and 1.5x-6x-40mm models. The circular center provides ultra-fast engagement at close distances, while the smaller dots of the reticle provide trajectory compensation out to 600 yards for the popular 5.56 and 7.62 cartridges. Illumination reduces time for shooter to get on target in any lighting condition and dramatically increases accuracy when the target is dark.


    Burris AR-Sights

    Burris AR-132


    Tactical shooters and brush hunters will appreciate the fast-on-target simplicity of this compact 1X red dot optic. With both eyes open, situational awareness is unimpeded and the illuminated dot reticle functions in all light levels. A single 4 MOA dot is fast onto the target and offers 10 illumination power settings to match all real-world conditions. Three Picatinny mounting points allow for accessories.

    Internal assemblies are hand-fitted and the entire design is beyond tough. Offered with a Burris Forever Warranty, the unit is powered by a popular CR2032 battery. Pair the AR-132 with the available AR-QD mount, which uses twin locking levers in lieu of hex nuts for lightning quick, repeatable zero mounting to any Picatinny rail. It’s also the perfect match for the Burris AR-Tripler (see below) for instant 3X magnification.

    300209 - Burris AR-132 - $399


    Burris AR-Tripler


    When you want to be able to transition to mid-distance – and back again – without swapping weapons or optics, the AR-Tripler is your solution. Mounted in the AR-QD Pivot Ring, it rides in tandem behind your CQB optic but pivots off with the push of a button. The windage and elevation adjustments allow you to fully utilize the complete reticle image of partner optics. Protected by the Burris Forever Warranty.

    300213 - Burris AR-Tripler - $329


    Burris AR-QD Pivot Ring


    The AR-QD Pivot Ring quickly and easily mounts the AR-Tripler inline behind non-magnified optics. For close quarters shooting, just flip to the side with a push of the button. To engage targets at longer distances, flip the AR-Tripler to its upright position and it automatically locks into place. A Quick Detach (QD) mount makes installation a snap. Protected by the Burris Forever Warranty.

    420168 - Burris AR-QD Pivot Ring - $99


    Burris AR-332


    The Burris AR-332 is perfect for quick shooting at point-blank to intermediate ranges. 3X magnification plus the Ballistic CQ reticle (see above for more details) provide for instinctive target acquisition. The black reticle is etched directly onto the prism with red and green light illumination available with the turn of a dial. Reticle dots correspond to bullet drop from 5.56 or 7.62 rounds, however this tough optic is built to handle much heavier recoil if needed.

    The AR-332 is designed for reliability under harsh use, with hand-fitted internals and exacting tolerances. The Burris Forever Warranty protects you and your optic from anything you can throw at it.

    300208 - Burris AR-332 - $499


    Burris AR-532


    The Burris AR-536 is designed for lawmen, military, and competitive shooters who want additional range from a compact, fast- acquisition optic. The red or green illuminated reticle offers nano-second response to immediate targets but also allows for careful shooting at distant threats. A rotary, 10-position power selector allows for all lighting conditions and the reticle is powered by a CR2032 battery. The Ballistic CQ reticle (see above for more details) features holdover dots, good out to 600 yards, that work best with 5.56 or 7.62 ammunition.

    The sight has Picatinny rails for piggy-backing additional sights, lasers or lights. The entire design is rugged and backed by the Burris Forever Warranty.

    300210 - Burris AR-532 - $599


    Burris AR Riflescopes


    The new Burris AR Riflescopes are crafted for the no-nonsense AR shooter who demands first-round accuracy every time.

    A Custom Clicker elevation turret matches the shooter’s ammunition, and holdover becomes a distant memory as the shooter determines range and dials in the exact yardage for precise aiming.

    A convenient WindMap helps you determine wind hold-off for your 5.56 or 7.62 cartridge. The reticle works seamlessly with the customized elevation turret and WindMap, featuring MOA windage tick marks that compensate for real-life field conditions.

    Toughness is the redundant design theme, from solid one-piece tubes, to internal double-spring tension assemblies, all designed for rough handling in the field.


    Cartridge Calibrated Custom Clicker


    The Burris Cartridge Calibrated Custom Clicker is a customized elevation turret that gives you the ability to match your elevation adjustment to your favorite cartridge. Once the range to your target is established, you simply dial in the distance to your target and you no longer have to worry about holdover – your center crosshairs are the perfect aiming point for your cartridge at that distance. This customized riflescope will make you a more accurate shooter and give you ultimate confidence in the field.

    AR Riflescopes come with Custom Clickers already calibrated for two of the most popular tactical cartridges – 5.56 and 7.62. Pick your model based on the ammunition you utilize the most.

    However Burris can also help you to create your own Custom Clicker for you favorite cartridges: see an authorized Burris dealer for details.


    Customized WindMap™


    The customized Burris WindMap™ works seamlessly with your customized elevation knob, providing wind hold-off information calculated for your exact cartridge.

    With C4 Plus technology, you focus on your target and the windage compensating reticle with your right eye. Then, simply refocus to your left eye and you can easily see the WindMap (as shown above) for the appropriate value.

    The value tells you how many MOA tick marks to hold into the wind to compensate for a 10MPH wind at 100-yard increments.


    Burris C4 Wind MoA Reticle


    The C4 Plus reticle design has MOA tick marks extending out to 10 MOA on each side, allowing shooters to easily compensate for wind. Use the customized WindMap to make wind hold-off calculations based on your specific ammunition.

    Burris AR Riflescopes take the guesswork out of elevation and windage aiming adjustments to deliver an affordable customized shooting experience.

    200333 - Burris AR Riflescope 4.5-14x44mm 5.56 - $579
    200334 - Burris AR Riflescope 4.5-14x44mm 7.62 - $579
    NOTE: the above AR Riflescopes come with an ARD included



    Burris AR-P.E.P.R. Mounts


    Available for 1" or 30mm tubes, these scope mounts allow for full-sized scopes to be properly positioned on AR's with Picatinny rail uppers.

    The Burris AR-P.E.P.R. are designed to provide up to 2 inches of forward scope positioning for optimum eye relief and full field-of-view. Units ship with both picatinny rail topped rings, and smooth rings. No matter how long or large your optic, the AR-P.E.P.R. mount will put it in the right place.

    Burris AR-P.E.P.R. QD Mounts


    The AR-P.E.P.R. Quick Detach Mount makes it easy to gear up for different applications or shooting disciplines. Two QD levers make it easy to change optics or switch to iron sights and still maintain return-to-zero reliability.

    410343 - AR-P.E.P.R. 1" standard mount - $109
    410341 - AR-P.E.P.R. 30mm standard mount - $109
    410344 - AR-P.E.P.R. 1" QD mount - $149
    410342 - AR-P.E.P.R. 30mm QD mount - $149
    NOTE:
    all of the above units ship with BOTH the picatinny rail and smooth top rings - you get both!
    Last edited by plainSight Solutions; 05-19-2016 at 01:10 PM.


    Omer Hrbinic
    Tell: 1 (250) 747-1621
    Cell: 1 (250) 991-1406
    www.PrecisionOptics.net
    PrecisionOptics@hotmail.com

  2. #2
    CGN Ultra frequent flyer rally guy's Avatar
    Join Date
    May 2010
    Posts
    3,882
    I am interested in a burris mtac 1.5-6x42. I am wondering how is the feild of view?

  3. #3
    Business Member plainSight Solutions's Avatar
    Join Date
    Dec 2009
    Posts
    915
    Quote Originally Posted by rally guy View Post
    I am interested in a burris mtac 1.5-6x42. I am wondering how is the feild of view?
    http://www.burrisoptics.com/mtac1x6x.html

    33 feet @ 100y at 1.5x to 13 feet @ 100y at 6x.


    Omer Hrbinic
    Tell: 1 (250) 747-1621
    Cell: 1 (250) 991-1406
    www.PrecisionOptics.net
    PrecisionOptics@hotmail.com

  4. #4
    CGN Regular uncledillers's Avatar
    Join Date
    Aug 2010
    Location
    Comox Valley
    Posts
    314
    Any news on the xtr 2's
    Religion is the most destructive of all of mankinds inventions~

  5. #5
    CGN Ultra frequent flyer rally guy's Avatar
    Join Date
    May 2010
    Posts
    3,882
    Quote Originally Posted by plainSight Solutions View Post
    http://www.burrisoptics.com/mtac1x6x.html

    33 feet @ 100y at 1.5x to 13 feet @ 100y at 6x.
    how can one use this scope with such a narrow feild of view for the magnification?

  6. #6
    CGN Ultra frequent flyer rally guy's Avatar
    Join Date
    May 2010
    Posts
    3,882
    I mean it's got to be a mistake as this 1.5-6x42 as the same spec field of view as there e1 3-9x40. ....kind of weird?

  7. #7
    CGN Ultra frequent flyer Trinimon's Avatar
    Join Date
    Jan 2012
    Location
    Onterrible
    Posts
    15,054
    Any Burris Fastfire III with picatinny mounts in stock?
    CSSA Member

  8. #8
    CGN frequent flyer 15567's Avatar
    Join Date
    Oct 2005
    Posts
    1,998
    Are Burris Fastfire III arriving anytime?
    "What we got here is a failure to communicate"

  9. #9
    CGN Regular slim123's Avatar
    Join Date
    May 2009
    Location
    Gateway to the Rockies
    Posts
    434
    yeah im looking for another fastfire also. I have 2 now and love them....but I want the fastfire III with the option to set brightness, and shut off the auto setting.

  10. #10
    CGN Ultra frequent flyer
    Join Date
    Apr 2008
    Location
    Punk-Ass-istan
    Posts
    4,448
    How about Burris XTR rings and the picitanny ring tops too? (pretty please)

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •