The Steel AA Beowulf mags work amazing in my T97
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
The Steel AA Beowulf mags work amazing in my T97
Lions need not concern themselves with the opinions of the lambs.
Still curious on the NRR but for now....
Stock mag works great and drop
LAR15 mags work great but not drop free
50 beo mags work great but not drop free
I wouldn't say tight, they only take a slight tug to get out.
for mineOriginally Posted by ShawnC6
Stock mag goes in smooth and drops free
Lar-15 (the best fit) goes is smooth and drops free
magpul pmag M3...they go in with difficulty and you need to be the hulk to pull them out.
All you have to do is ask.Looks like it's time to update the ETA again
Listen, and understand. That Liberal is out there. It can’t be bargained with. It can’t be reasoned with. It doesn’t feel pity, or remorse- only fear. And it absolutely will not stop, ever, until your guns are gone.
one of these mags is the PVC-50 beowulf mags works fine for me
https://www.facebook.com/video.php?v...88447907705147
Plastic ones aren't drop free. Had to do a lot of sanding to get them to fit properly.
Same - you have to be careful with the sanding to make the plastic mags fit in the T97 NSR fit. There's a few points of contact that are tight. Remember, you can always sand a little more off, but you can never put it back again, so do it in increments and constantly check the fit.
__________________________
For me the stock mag appears to fit and drop free but was causing the bullet to get crushed into the case. The lar 15s work very we'll in my t97 haven't tried p mags yet.
Lar 15 pistol mags work great
Seem to be the type97 likes The gi steel mags , As well the lar 15 mags, I have 8 and all work prefectly drop free and no feed issues I've brunt a crate of norinco 556 and no ftf or anything not one jam. My pmags took a little sanding and now work too also drop free and never gave me an issue.
Posting Permissions
