Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 36

Thread: Winchester SXP Extreme Defender +2 magazine PRE ORDER

  1. #21
    CGN Regular Folklorestatus's Avatar
    Join Date
    Dec 2014
    Location
    NS
    Posts
    310
    What's the best way to snap that retaining ring on for the sling mount? They never taught me in sheet metal school.

  2. #22
    CGN Regular Folklorestatus's Avatar
    Join Date
    Dec 2014
    Location
    NS
    Posts
    310
    Answer: Call the old man and borrow his nifty pliers.

  3. #23
    CGN Regular diablo_man's Avatar
    Join Date
    Nov 2011
    Location
    BC
    Posts
    207
    I sacrificed an old small C clamp, filed the upper jaw until it was thinner and rounded to roughly match the inside of the magazine tube. This took about 15 minutes?, then using a thin piece of wood on the outside to protect the exterior of the magtube,cranked it tight.

    It eventually moved the dimples out enough to be able to lightly tap in a socket(think it was a 17mm deep socket)that fit snugly into the tube.
    Once the socket got past the dimples, then tapped the outside carefully with a hammer to really flatten it out and keep a nice round shape. A little tiny bit of light filing on the outside so the barrel ring would slide over an it works perfectly. Used cold blue on the lightly filed areas. This way, very smooth no holes in the mag tube, very little material removed at all.

    Also, after removing those dimples, and using S and J's new follower but with the original mag tube cap, I am now able to fit 6 in the stock tube, and 7 with the +2 adapter.

  4. #24
    Business Member badboybeeson's Avatar
    Join Date
    Mar 2004
    Location
    East ontario
    Posts
    15,443
    One of the thing I do it this
    Drill out the center of the dedent with. Small drill, no pressuer to be used.
    They larger drill.
    After they die grinder and fine bit. Aka dremall.
    Then use socket or denednt removal tool to make sure not bump is left.
    Last fine felt buffer on die grinder.
    Clean all bits out then check with both factory follower and the s&j no jam.

    The reason I do it this way. Not just use the exspensive. Dedent removal tool is, useing the tool in one or 2 shots. Sometime can deform. The magtube. Ask me how I know...
    I have done 100,s of remington,s.
    Bbb

  5. #25
    Business Member badboybeeson's Avatar
    Join Date
    Mar 2004
    Location
    East ontario
    Posts
    15,443
    this are now in stock and shipping out to a few dealers and clients.
    bbb

  6. #26
    Newbie ajheath's Avatar
    Join Date
    Sep 2018
    Location
    Whistler, BC
    Posts
    15
    So... looks like I’m a few years late to the party! Any chance you’ll be making another run of the mag extenders for the SXP? Any insight would be much appreciated!

  7. #27
    CGN Regular SIG FAN's Avatar
    Join Date
    Jul 2011
    Location
    Eastern Ontario
    Posts
    746
    I’m also interested in this.

    Any way you could have these powder coated to match the black chrome finish of the regular SXP Defender?

  8. #28
    GunNutz
    Join Date
    Apr 2017
    Location
    Ottawa
    Posts
    1,513
    They stopped making them as Winchester changed threading from one SXP model to another. My +2 extension wouldn't come on and I couldn't return it.

  9. #29
    CGN Regular SIG FAN's Avatar
    Join Date
    Jul 2011
    Location
    Eastern Ontario
    Posts
    746
    Damn, too bad!!

  10. #30
    Newbie ajheath's Avatar
    Join Date
    Sep 2018
    Location
    Whistler, BC
    Posts
    15
    Bummer indeed! Anybody know of any other Winchester SXP mag extension options out there?

Page 3 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •