Tikka T3 30-06 Stainless

[xmanrigger]

Hello. New to the forum and first post.

I am considering the Field Tactical chassis for my Tikka T3 30-06. From reading in the Cadex website, it looks as though the chassis is available for that rifle. Is this so, and if so, what is involved in swapping the stock/chassis? Is this best done by a gunsmith or is it a cool DIY project? I am confident I have the skills to do the swap if no machining or specialty tools are required.

Thanks, 'rigger

[Cadex Defence]

Hello. New to the forum and first post.

I am considering the Field Tactical chassis for my Tikka T3 30-06. From reading in the Cadex website, it looks as though the chassis is available for that rifle. Is this so, and if so, what is involved in swapping the stock/chassis? Is this best done by a gunsmith or is it a cool DIY project? I am confident I have the skills to do the swap if no machining or specialty tools are required.

Thanks, 'rigger

Good day

This is a 10 minute installation with no special tool required (except a torque wrench that we highly recommend for your action screws). No need to be a gunsmith if you are a minimum mechanical inclined.

Yes this is a configuration that is newly offered as long as ordered for the Tikka T3 factory magazine.

Let me know if you have more questions

Best regards

[xmanrigger]

Wow. Thanks for the quick reply. Appreciated. This is looking promising.

Next question: From the time ordered, what is the average shipping/delivery time? And do I order directly from Cadex, or a dealer?

Is there an advantage to roller bedding vs traditional glass bedding?

[Cadex Defence]

Wow. Thanks for the quick reply. Appreciated. This is looking promising.

Next question: From the time ordered, what is the average shipping/delivery time? And do I order directly from Cadex, or a dealer?

Is there an advantage to roller bedding vs traditional glass bedding?

Depends on the time or the year that you order, it could vary from 4 to 8 weeks depending of our production schedule.

I strongly suggest that you order through one of our dealers. Our dealers will sometimes sell cheaper than our website so it would be stupid not to save a bit of hard earned money.

The roller bedding technology completely eliminate the need for a glass bedding. The contact is metal to metal and the pressure on the action bolts remains the same no matter the temperature.

Best regards