I have a 12.5" tube fed Grizzly with a bead sight. It's drilled and tapped for a rail, but no actual rail came with it. 870 rails don't fit it as I understand...any source for these?
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
I have a 12.5" tube fed Grizzly with a bead sight. It's drilled and tapped for a rail, but no actual rail came with it. 870 rails don't fit it as I understand...any source for these?
Interested in finding out for my 8.5" Grizzly mag too.
I ended up getting a UTG 870 rail for my grizz magfed. I had to dremel a fair but on the underside of the rail to allow it clearance to the holes. I think the receiver is just slightly taller or thicker at the top than a proper 870 Took me all of 30 minutes of dremel work and 30 something bucks from amazon.
I bought mine a few years back and the rail come with it inside the box.
It's better to have questions you can't answer, then answers you can't question.
When you have no property rights, YOU ARE THE PROPERTY!
WEXIT, IPSC, CCFR.
I bought mine uses. No rail
Remington 742 Has a type of rail you could probably use, you can have it in weaver/pic or 11mm-7/16
google photos will help you.
Posting Permissions
