Non-Restricted ACR Barrels READY @ Dlask Arms

[Len One O]

Thats fine, I'll figure it out.

[Brian46]

Is it possible to get the parts required without needing to salvage them from the current barrel?

yes, the canadian distributor (gravel) can get them for you. Last time I priced the gas system parts out it was over $700, now probably more.

[Len One O]

Thanks Brian! I think i'm just going to start going to you with my questions. Pretty sure I already have a couple times.

[mattjeff]

We re-use the original components from your barrel. There is no such thing as 'quick change' because the minute you put the 16" barrel back on it will need a status change back to Restricted.


Leigh
Dlask Arms Corp.

I've purchased an ACR with a NR barrel already. Was simply looking at options for spare barrels. By your answer, I assume you must modify the upper receiver because the ACR I purchased has a quick change barrel on it.

[Cyanide Ride]

I've purchased an ACR with a NR barrel already. Was simply looking at options for spare barrels. By your answer, I assume you must modify the upper receiver because the ACR I purchased has a quick change barrel on it.

No modifications to upper that I am aware of.

What Dlask is trying to articulate if I am not mistaken, is that the components to mount the barrel are not readily available (locking ring, handle, spacer, gas system, etc.) So they must use your old hardware from your restricted barrel to install on the new barrel.

You can buy one and keep it around until such time you deem necessary to install the new one, in which they would need everything off the old barrel.

[Dlask Arms]

No modifications to upper that I am aware of.

What Dlask is trying to articulate if I am not mistaken, is that the components to mount the barrel are not readily available (locking ring, handle, spacer, gas system, etc.) So they must use your old hardware from your restricted barrel to install on the new barrel.

You can buy one and keep it around until such time you deem necessary to install the new one, in which they would need everything off the old barrel.

Absolutely correct. If you want to purchase a whole new set of barrel hardware now the cost would be in the range of $400-500 because of the US dollar.


Leigh
Dlask Arms Corp.

[Mister Donut]

Hmmm.....just found this thread and I'm a soon to be owner of a restricted one. How many of these barrels do you have left? Should I be panicking to get some $$ together for this?

http://dlaskarms.com/products/bushma...cr-18-5-barrel

[merlin1]

how much

[Mister Donut]

how much

Link says $550

[Dlask Arms]

Link says $550

Yes Sir, $550 includes swapping the barrel and changing the status with the Registrar to NR.


Leigh
Dlask Arms Corp.