Long Action Magpul Hunter 700 Announcement!

[ctcs]

Very soon - email notification up on Monday.

[Xmrkoots]

Has there been any word yet?

[ctcs]

Next week!

[ctcs]

Announcing the arrival of the Magpul Hunter 700L - Remington 700 LONG ACTION Stock in Canada!



Made from reinforced polymer and an anodized aluminum bedding block, the Magpul Hunter 700L Stock offers users a cost effective replacement featuring fully adjustable length of pull, comb height, and enhanced ergonomics.

Compatible with Remington 700 Long Actions, this stock requires no bedding and is a true “drop-in” solution for the end user*. The 700L is also M-LOK® compatible to accept a broad range of accessories.

Also compatible with our Bolt Action Magazine Well 700L which allows the rifle to be used with detachable AICS-spec box magazines without the need for custom inletting.

Made in U.S.A.

FEATURES

• Compatible with standard Remington 700 pattern long action rifles with stock Remington hinged floorplates*
• Easily upgradeable to removable AICS-spec long action magazines (.30-06 or .300WM pattern) with the affordable Magpul Bolt Action Magazine Well 700L
• Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding block
• Accepts ALL factory Remington barrels including aftermarket profiles up to a Medium Palma (0.920" dia. 5.50" forward of the breech)
• Tapered Beam design provides good rigidity through forend and will free-float compatible barrels
• 60 degree grip angle from bore axis
• Adjustable LOP from 13.0”-15.0” with included 0.50” Spacers
• Rubber recoil butt-pad included and optional OEM Butt-Pad Adapter available for use with aftermarket pads
• Optional 0.00", 0.50", and 0.75" Cheek Risers available to adjust cheek weld (Stock comes pre-fitted with 0.25" Riser)
• Accepts factory and most aftermarket triggers
• M-LOK slots on forend sides and bottom for a wide variety of accessory and sling mounting options
• Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
• Push-button QD swivel compatibility in rear with optional Sling Mount Kits
• Left and Right rear 1-1/4” Footman’s Loops
• *NOTE: Fits right-hand recievers only.

All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well 700L Standard or Magnum. Not compatible with Remington 700 DM models with their proprietary detachable box magazines.

Since factory action mounting screws can come in a variety of lengths, grinding to length or utilizing longer replacements may be necessary to optimize fit with the Hunter 700L.

$399.99 - available in Black only at this time

------

Also announcing the arrival of the Magpul PMAG 5 AC L, Magnum, 5-Round AICS Long Action Magazine



The PMAG 5 AC L, Magnum is a reliable and durable polymer magazine for .300 Winchester Magnum based family of cartridges and is compatible with long action AICS-spec bottom metal, to include the Bolt Action Magazine Well 700L for the Hunter 700L Stock.Built using M3 technology, this magazine is advanced in both material and manufacturing processes providing an economical, lightweight, durable and reliable single-stack bolt action magazine.

Built using M3 technology, this magazine is advanced in both material and manufacturing processes providing an economical, lightweight, durable and reliable single-stack bolt action magazine.Made in the USA.

Made in the USA.

FEATURES

• Compatible with long action AICS (Accuracy International Chassis Systems) pattern bottom metal and Magnum cartridges built on a 0.530" belted case head such as .300 Winchester, .257 Weatherby, .264 Winchester, .270 Weatherby, 7mm Remington, .300 H&H, and others*
• Accepts a cartridge overall length of up to 3.50"
• Next-generation impact and crush resistant polymer construction
• Self-lubricating follower for increased reliability
• Long life stainless steel spring
• Paint pen dot matrix panels on the bottom of the body to allow for identification marking
• Flared floorplate aids magazine handling and is easy to disassemble for maintenance

*NOTE: NOT compatible with .404 Jeffery based cartridges and its derivatives such as the Remington Ultra Magnums (RUM/RSAUM) and Winchester Short Magnums (WSM/WSSM)

$59.99 each

------

Stock in other colours, long action magwells, and 10-Round AICS Long Action magazines arriving soon!

[celticwolf]

Epic!!!

[BPM]

Hey guys! I need a long action magwell and mag. The kits generally include a magazine. Do you have any of these in stock?

[ctcs]

The Long Action and Long Action Magnum Magwell has still not yet been released by Magpul - it still says the release is "Late 2016" on Magpul's website.

[BPM]

The Long Action and Long Action Magnum Magwell has still not yet been released by Magpul - it still says the release is "Late 2016" on Magpul's website.

Sorry perhaps I am misunderstanding or I wrote my question wrong.

You have the 700L Rifle Stock on your website showing in stock, you also sell the Long Action Mags for the Long Action Stocks that have been equipped with the Long Action Mag Wells, but the Mag Wells haven't been released yet? Magpul part: MAG569. I know they have been released, I've seen them locally however now out of stock. Just wondering if you stock them or have an ETA.

I have a 700L Rifle Stock. So I know that has been released.

Thanks for your help.

Cheers

[ctcs]

So MAG569 is the Long Action MAGNUM magwell - released

MAG489 is the Long Action magwell - not yet released

[BPM]

So MAG569 is the Long Action MAGNUM magwell - released

MAG489 is the Long Action magwell - not yet released

Perfect. Eta on the Magnum magwell?