Alberta Tactical Rifle Supply
Canada's Premier Precision Rifle Manufacturer
Please email all inquiries to info@albertatacticalrifle.com NOT through PMs
The Province of Alberta has been suffering for the last 30 plus years with an EAST infection
http://www.albertatacticalrifle.com/
Long Distance is BETTER than being there
Are you still making these? Would be interested in one for an X-Bolt Hell's Canyon Speed in .300 WSM...ideally Cerakoted to match the barrel/action, etc.
"Let the shoosting begin!!!" - Goldmember - Circa 2002
I'm an idiot as I don't even understand the question. I have an xbolt with xbolt rings and Leupold scope. I know what a rail is...wtf is a 0 moa and 20 moa rail??
CSSA, OFAH, EAST ELGIN SPORTSMEN'S ASSOCIATION MEMBER
I'd go for a 0 moa long action rail provided i can free up the funds when they are available.
0 MOA is parallel to the barrel. Used for shooting at closer distance.
20 MOA is downward of 20 minutes of angle, which is 1/3 degrees. 1 MOA = 1/60 of a degree, or 1.047'' at 100 yards. If you shoot longer distances you would use a 20 moa rail or a 20moa set of rings on a 0 moa rail.
"Close range" and "long range" is subjective and depends on your calibre, but rule of thumb for a 308 would be that less than 600 yards is close range, more than 600 yards is long range.
I would be in for a couple. Bare metal is fine. 0moa.
Alberta Tactical Rifle Supply
Canada's Premier Precision Rifle Manufacturer
Please email all inquiries to info@albertatacticalrifle.com NOT through PMs
The Province of Alberta has been suffering for the last 30 plus years with an EAST infection
http://www.albertatacticalrifle.com/
Long Distance is BETTER than being there
Any way to get a rail for the Winchester XPR?? I'm interested in a couple if the price was right
Is it wrong to love the clack clack bang, but wanna run from a click tick lol
Only IF there is enough demand to produce a product. To engineer a product, write programs and make fixtures is not cheap.
We were approached by several dealers to make these Browning rails and between them several hundred rails were ordered, hence making the product viable to produce.
To make just 2 oddball rails is possible but would be VERY expensive.
Alberta Tactical Rifle Supply
Canada's Premier Precision Rifle Manufacturer
Please email all inquiries to info@albertatacticalrifle.com NOT through PMs
The Province of Alberta has been suffering for the last 30 plus years with an EAST infection
http://www.albertatacticalrifle.com/
Long Distance is BETTER than being there