Attention Browning X Bolt owners

[alberta tactical rifle]

2 Long action in 20 MOA for me please. Cabelas can't keep the Talley ones in stock and EGW is sold out. These will sell.

Email the shop to place the order please.
We have these in both black nitrided finish as well as matte stainless.

[Shooster]

Are you still making these? Would be interested in one for an X-Bolt Hell's Canyon Speed in .300 WSM...ideally Cerakoted to match the barrel/action, etc.

[Ravenmanwoody52]

I'm an idiot as I don't even understand the question. I have an xbolt with xbolt rings and Leupold scope. I know what a rail is...wtf is a 0 moa and 20 moa rail??

[Lucas269]

I'd go for a 0 moa long action rail provided i can free up the funds when they are available.

[VinnyQC]

I'm an idiot as I don't even understand the question. I have an xbolt with xbolt rings and Leupold scope. I know what a rail is...wtf is a 0 moa and 20 moa rail??

0 MOA is parallel to the barrel. Used for shooting at closer distance.
20 MOA is downward of 20 minutes of angle, which is 1/3 degrees. 1 MOA = 1/60 of a degree, or 1.047'' at 100 yards. If you shoot longer distances you would use a 20 moa rail or a 20moa set of rings on a 0 moa rail.

"Close range" and "long range" is subjective and depends on your calibre, but rule of thumb for a 308 would be that less than 600 yards is close range, more than 600 yards is long range.

[Cerakote B.C.]

I would be in for a couple. Bare metal is fine. 0moa.

[alberta tactical rifle]

I would be in for a couple. Bare metal is fine. 0moa.

Then the natural stainless finish would be what you need to order. We currently have a good stock on the rails.

[jmichelin84]

Any way to get a rail for the Winchester XPR?? I'm interested in a couple if the price was right

[alberta tactical rifle]

Any way to get a rail for the Winchester XPR?? I'm interested in a couple if the price was right

Only IF there is enough demand to produce a product. To engineer a product, write programs and make fixtures is not cheap.

We were approached by several dealers to make these Browning rails and between them several hundred rails were ordered, hence making the product viable to produce.

To make just 2 oddball rails is possible but would be VERY expensive.