Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: MagWedge SKS Premium Grade KwikRail

  1. #11
    CGN Regular Spotagwan's Avatar
    Join Date
    May 2014
    Location
    Toronto Area
    Posts
    617
    shell deflector is built in the rail,kwik pin or through bolt options...nice rail...have one

  2. #12
    CGN Regular 98/29's Avatar
    Join Date
    Oct 2010
    Posts
    598
    Just installed mine yesterday. Quickpin, as expected is not as tight as the crossbolt. If you go with the quickpin, the back of the mount can shift to left or right about a millimeter, but if you use the crossbolt this mount is rock solid. Overall, I am very happy and this is a very stable mount for your SKS. Next week will be magwell's turn to be installed.
    Follow through isn't just a shooting fundamental, it's a life skill.

  3. #13
    Newbie
    Join Date
    Jul 2015
    Posts
    6
    Hey guys. I have one of these with the quick pin. It didn't fit snug at first but I was able to ever so slightly bend the kwikrail so that it fits tight at the rear mount. Also the one I have has some play where it attaches to the rear sight mount at the front of the rail. There was about 1mm play. (Probably tons of variation with so many different sks makers) I was able to make spacer that fits the gap perfectly and now the whole rail is rock solid. Just FYI if you get one of these they will probably need some attention, not every sks is the same. However, mine now holds zero between cleanings and works perfectly.

  4. #14
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210
    Tactical Sks rails are available now as well

  5. #15
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210
    Tactical rails available as well, allows use of stripper clips

  6. #16
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210
    bump

  7. #17
    BANNED
    Join Date
    May 2015
    Location
    A little North of Kamlooky
    Posts
    500
    How do you stop the roll pin from walking out on the front mount?

  8. #18
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210
    Bump

  9. #19
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210
    Bump

  10. #20
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210
    Top

Page 2 of 3 FirstFirst 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •