I see they changed the design since I bought mine....hmmm may need another.
https://www.canadaammo.com/product/d...0-steel-target
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
I see they changed the design since I bought mine....hmmm may need another.
https://www.canadaammo.com/product/d...0-steel-target
Last edited by Hitzy; 06-19-2016 at 09:52 AM.
Needs more cowbell...
That frame will last one shooting sesh before its cut into peices by shrapnel
But nice cheap frame I did the same at first but got tired of rebuilding them.
Don't cut your hands on the sharp copper jackets that will be stuck in the boards everywhere
LOL.. always room for more cowbell!Originally Posted by tootall
Enjoying your freedom? Thank A Soldier !!!
You say nobody needs an AR15? Well nobody needs a whiny little b*tch either yet here you are!
Happy cowbelling ....I mean gonging!!
MALO PERICULOSAM LIBERTATEM QUAM QUIETUM SERVITIUM
Member CCFR
Crap, i was hoping to get a season out of it not just a session lol.
My brother does welding, I'll get him rig something up if this shreds too quickly
Get yourself some rubber. We use old conveyor belt to line ours. Makes it last a "little" longer.
As Aviator says, find some old used conveyor belt, cut it and screw it to the inside of the frame, covering the wood.
We have done that to all our shrouds and find it lasts for several seasons of Cowboy Action Shooting.
Have a look at our website, www.ovmcowboys.ca and you'll see some examples.
The Cold Lake Kid: SASS # 51474,
GOFWG #141, Charter Member and Trail Boss East, Square Circle Wranglers ( www.squarecirclewranglers.ca )
GOLD member Leaders Circle. Provincial Corner Stone Member
Proudly Alberta Born and Raised.
Hoping Trail Boss soon becomes available!
I've heard strips of conveyor belt works well for haning gongs , basic rubber bungy straps also work fairly well. Your chain set up could be simpler with less opening links.
Bolts through the gong hole with nuts and washers on the back side to attach the chain would be cheaper then replacing shackles
Our Government trusts rivets more then law abiding gun owners.
Another option I've seen is fire hose or old tie-down or lifting straps to hang the gong. You can shoot them full of holes and they'll keep hanging where as one or two hits on the chains and you're hiking out to rehang the bell. I've done that a time or two, still using the old chains though because I still have a bunch of short scraps laying around.
لحم الخنزير المقدد تناول كافر
Posting Permissions
