Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: When might you be getting more XCR-L .223 18.6" Conversion Kits in?

  1. #11
    CGN Regular
    Join Date
    Mar 2004
    Location
    South east Sask.
    Posts
    977
    I used to change brass deflector between 556, 7.62X39 and 6.8. Don't bother with it any more and doesn't seem to matter.
    Socialism is the philosophy of failure, the creed of ignorance and the gospel of envy,it's inherent virtue is the equal sharing of misery. WLS Churchill

  2. #12
    CGN Ultra frequent flyer Dad003's Avatar
    Join Date
    Mar 2012
    Location
    Fort Saskatchewan
    Posts
    3,782
    Quote Originally Posted by shnib View Post
    Its great, put about 4000 rounds down range, started to jam up noticed worn out bolt replaced it and about 2000 rounds since all steel cased of course
    you must have been unlucky because i think 9x19 got one in 7.62x39 and he probably had over 19k in it ,

    mine have been running well probably somewhere near the 2.5-3k round with it
    »The tree of liberty must be refreshed from time to time with the blood of patriots and tyrants.« Thomas Jefferson

  3. #13
    CGN Regular slim123's Avatar
    Join Date
    May 2009
    Location
    Gateway to the Rockies
    Posts
    434
    yeah to wear out a bolt after 4k rounds seems very low...must have been a bad bolt from the start...I would have contacted rob arms for a replacement...they are awesome to deal with and super fast...I contacted them one day and immediately had a email from wolverine the next day...part in the mail

    or my guess is that maybe it could be that it wore out your extractor...the steel lacquered cases tend to fit tight/stick in the chamber....I had a few stuck in the beginning with my 7.62.....I polished the chamber...and it ran perfectly after..

    wolverine/rob arms a great team

  4. #14
    CGN Regular shnib's Avatar
    Join Date
    May 2011
    Location
    the deep south
    Posts
    140
    my bolt was replaced free of charge so i have no complaints and thats why i say shes great

  5. #15
    Business Member Grumpy Wolverine's Avatar
    Join Date
    Jul 2013
    Location
    Look over your shoulder
    Posts
    95
    Quote Originally Posted by slim123 View Post
    yeah to wear out a bolt after 4k rounds seems very low...must have been a bad bolt from the start...I would have contacted rob arms for a replacement...they are awesome to deal with and super fast...I contacted them one day and immediately had a email from wolverine the next day...part in the mail

    or my guess is that maybe it could be that it wore out your extractor...the steel lacquered cases tend to fit tight/stick in the chamber....I had a few stuck in the beginning with my 7.62.....I polished the chamber...and it ran perfectly after..

    wolverine/rob arms a great team
    Just email us instead of Robarms, as we are the Robarms rep for here and we take care of repairs and warranty. 4K seems a little low for that kind of wear, but lubrication also comes into play.
    If you have any questions please call or e-mail:

    Phone: (204) 748-2454
    E-mail: sales@wolverinesupplies.com Retail Sales


  6. #16
    CGN Regular shnib's Avatar
    Join Date
    May 2011
    Location
    the deep south
    Posts
    140
    i did email you guys at wolverine i guess i had one of the earlier models with known bad bolts and you guys replaced it and all good now! cant go wrong with wolverine!

  7. #17
    Business Member Grumpy Wolverine's Avatar
    Join Date
    Jul 2013
    Location
    Look over your shoulder
    Posts
    95
    Quote Originally Posted by shnib View Post
    i did email you guys at wolverine i guess i had one of the earlier models with known bad bolts and you guys replaced it and all good now! cant go wrong with wolverine!
    That makes perfect sense, there were a few with "soft" bolts. You should be good to go for many many thousands of rounds now.
    If you have any questions please call or e-mail:

    Phone: (204) 748-2454
    E-mail: sales@wolverinesupplies.com Retail Sales


  8. #18
    CGN Regular shnib's Avatar
    Join Date
    May 2011
    Location
    the deep south
    Posts
    140
    Quote Originally Posted by Grumpy Wolverine View Post
    That makes perfect sense, there were a few with "soft" bolts. You should be good to go for many many thousands of rounds now.
    i will certainly work on it thanks!

  9. #19
    Business Member Grumpy Wolverine's Avatar
    Join Date
    Jul 2013
    Location
    Look over your shoulder
    Posts
    95
    Quote Originally Posted by shnib View Post
    i will certainly work on it thanks!
    Enjoy that boom stick and have some fun
    If you have any questions please call or e-mail:

    Phone: (204) 748-2454
    E-mail: sales@wolverinesupplies.com Retail Sales


Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •