New product: 7.62/303 Bullets, 123 grain

[CanAm]

0.310" 123 Grain bullets pulled from unfired 7.62x39 cartridges
Great plinking bullets for 7.62x39, 303 British, 7.62x54R, etc
Steel Core
Case of 1000 bullets
Made in Russia
$149.99




https://www.canadaammo.com/product/d...ain-pull-down/

[meiyunjin76]

it mentioned can be used in 7.62x54r, can it be used in 308 WIN?, I thought normally both 7.62x54r and 308 WIN should be over 158G.

[mbogo3]

Not in .308 as it is .308 diameter and these are .310 bullets. The 7.62x54R and .303 British ..........yes but accuracy may vary gun to gun because of .310 bullet fit in bores anywhere from .310 -.316 These are for plinking not accuracy loads.If these pulled bullets have a hollow base they will expand to "fit" the bore when fired if the load is warm enough ...............helping accuracy.If you load 7.62x39 these are cheap projectiles for non-corrosive fun.......trap line beaver loads etc.....a 1-10" twist will work fine for these......Harold

[Darren saltiel]

I've sized these in a Lee bullet sizer with a lox they work fine as a light plinking load for my m305 (m14)

[mobusten]

Any info on the jacket? Copper or bimetal?

[CanAm]

Any info on the jacket? Copper or bimetal?

bimetal

[TFunfer]

Any chance of something like this but with bullets pulled from unfired 7.62x54R?

[CanAm]

Any chance of something like this but with bullets pulled from unfired 7.62x54R?

Yes, we are working on it

[meiyunjin76]

and 308 WIN please!

[TFunfer]

Yes, we are working on it

Great!