Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: 10.5 & 15.7 Colt Canada British Special Forces 3rd Gen Integrated Upper Reiver

  1. #1
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210

    10.5 & 15.7 Colt Canada British Special Forces 3rd Gen Integrated Upper Reiver

    TAKING PRE-ORDERS FOR FEB, last batch able to order , all orders in by midnight tonight Jan 11, no more available after these

    HAVE 1 10.5 UPPER LEFT IN STOCK UNSPOKEN FOR FOR IMMEDIATE SHIPPING

    PURCHASE 10.5 UPPER HEREl 1 left for immediate sale

    PURCHASE 15.7 UPPER HERE

    Name:  image001.jpg
Views: 5914
Size:  23.3 KB
    Attachment 67975
    Attachment 67976

    PRE ORDERS FOR NOV DELIVERY , FREE SHIPPING APPLIES, will not be charged until ready to ship

    10.5 & 15.7Integrated Upper Receiver With BCG and Charge Handle

    Colt Canada British Special Forces 3rd Gen Integrated Upper Receiver’s

    NOT SURPLUS OR OVER RUNS

    DESCRIPTION:

    GEN 3 (current PRODUCTION Military) Integrated Upper Receiver (IUR):

    Made for the UK Special Forces

    Interchangeable fit on all Mil-Spec “push pin" lowers;

    Fully floating barrel system;

    Dry film lubricated bolt carrier channel;

    Screw retained (easily maintained) low profile gas block (under the handguard for safety);

    Mil-Spec hard anodized black;

    IUR is marked COLT CANADA 2C085 and NATO on the rail;

    Straight gas tube to increase life and ease of installation.



    BARREL:

    Iconic “Colt Canada” cold hammer forged in your choice of 10.5” or 15.7” fully chrome lined barrel;

    Canadian Forces Spec thicker chrome;

    Phosphated to Mil-Spec;

    Improved integral forged carbine chamber;

    Colt Canada hammer forged choke bore;

    1/7” twist RH/ 6 groove NATO approved bore;

    Batch marked barrel and barrel extension;

    High pressure tested HPT and magnetic particle inspection MPI as per Canadian Mil-Spec;

    Anti corrosion coating applied under the handguards;

    New liner to improve thermal protection of hands.



    FLASH HIDER:

    Standard C7/C7A1/C8/C8A2 type half birdcage for compensation and flash reduction.



    RAILS:

    Full top and bottom rails (10.5” 37 top and 19 bottom, 15.7” 46 top and 28 bottom);

    Reinforced grenade launcher recoil lug;

    The side rails are partially railed with 10 slot front accessory mounting point and slotted sling fitting on each side

    Rail slots are numbered with laser engraving;

    The rails are NATO STANAG 4694 spec and are back compatible with MIL-STD-1913 accessories;

    Protected low profile gas block;

    IUR has a hardened steel insert for the cocking handle latch to resist wear with enlarged tactical latches



    BOLT CARRIER ASSEMBLY:

    Full Canadian Forces specification (Military configuration) bolt carrier assembly;

    Proof tested, MPI inspected, and lot number controlled bolt;

    CF spec high retention staking of the carrier key;

    Chrome lined carrier and key for wear resistance;

    Chromed firing pin.



    COLT CANADA TACTICAL CHARGING HANDLE:

    Extended ambidextrous Tactical Latch for easy cocking of your gun with optics in place;

    Solid latch pin is permanently staked in place for worry free operations;

    Mil-Spec finishes applied for weather resistance.

    Name:  image001.jpg
Views: 5914
Size:  23.3 KB
    Last edited by GP tactical; 01-11-2017 at 11:01 AM.

  2. #2
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210
    Will not be charged until the uppers ship

  3. #3
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210
    If anyone would also like a 1-4 elcan to go with we have in stock

  4. #4
    CGN frequent flyer Donster 125's Avatar
    Join Date
    Nov 2008
    Location
    Toronto
    Posts
    1,322
    Does the 15.7 have a 12" rail?

  5. #5
    CGN Regular
    Join Date
    Mar 2014
    Posts
    159
    ...
    Last edited by jasondhaynes; 04-01-2018 at 07:07 PM.

  6. #6
    CGN frequent flyer Stoner99's Avatar
    Join Date
    Jan 2014
    Posts
    1,690
    Quote Originally Posted by jasondhaynes View Post
    Bought 5. Great price here
    you bought 5 uppers ?

  7. #7
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210
    Physical length of the various rail sections are as follows;



    10.5 Top (from Charge Handle slot) 16"

    Front side 3.5"

    Rear side 1"

    Bottom (ahead of GL lug) 8"



    15.7 Top (from Charge Handle slot) 19.5"

    Front side 4.5"

    Rear side 1"

    Bottom (ahead of GL lug) 11.5"

    Quote Originally Posted by Donster 125 View Post
    Does the 15.7 have a 12" rail?

  8. #8
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210
    Order going in end of day, if you want one brought in

  9. #9
    CGN Regular
    Join Date
    Mar 2014
    Posts
    159
    ...
    Last edited by jasondhaynes; 04-01-2018 at 07:07 PM.

  10. #10
    Expired Supporting Dealer
    Join Date
    Dec 2008
    Location
    Grande Prairie
    Posts
    1,210
    order is in thanks to all that pre ordered, we are still taking orders on a pre order basis

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •