Results 1 to 7 of 7

Thread: Adams Arms VDI Brawler & Enforce Glock 17 Slide Assembly with Threaded Barrel

  1. #1
    Expired Business Member
    Join Date
    Oct 2011
    Location
    Vancouver, BC
    Posts
    2,275

    Adams Arms VDI Brawler & Enforce Glock 17 Slide Assembly with Threaded Barrel

    Now available in limited quantities

    Adams Arms VDI Brawler Slide Assembly (Glock 17)



    The VooDoo Innovations Glock 9mm Slide Assembly is designed as an improved drop-in fit for the Glock. The VDI Slide is profiled and lightened to reduce recipricol mass and decrease felt recoil. Our VDI Slides are cut from stainless steel with enhanced front and rear cocking serrations for improved manipulation and improved slide geometry to draw your eye to the front sight. The VDI Barrel is machined to tighter fitment tolerances to increase accuracy potential without the need of gunsmith fitting. The barrel features a SAAMI spec 9mm Match chambering, Match Grade Rifling to allow the use of any 9mm projectile (not just jacketed bullets), threaded ½ x 28 TPI for use with 9mm suppressors and compensators, machined from 416R stainless steel, and Finished in Voodoo Innovations LifeCoat process. Includes VDI Thread Protector.

    FEATURES

    Complete Replacement (9x19MM) Slide Assembly
    • Profiled and Lightened Slide to Reduce Reciprocal Mass and Decrease Felt Recoil
    • Enhanced Front and Rear Cocking Serrations for Improved Manipulation
    • Improved Slide Geometry to Draw Your Eye to the Front Sight
    • Threaded Barrel for Suppressor or Compensator Use
    • Billet Extractor
    • Includes Black Serrated Suppressor-Height Sights
    • 3 recoil springs so you may tailor the gun to your shooting.
    • Green - Standard spring
    • Yellow - 5% lighter spring for subsonic ammunition
    • Red - 5% Stronger spring for +P ammunition


    9mm Match Grade Barrel
    • SAAMI Spec 9mm Match Chambering
    • Tighter Tolerances for Accuracy
    • Match Grade Rifling
    • Allows for use of any 9mm projectile, not just jacketed bullets
    • Threaded with Protector
    • ½ x 28 TPI for Compensators and Suppressors


    LifeCoat Finish
    • Melonite & PVD


    Made in the USA
    • Life-Time Warranty



    SPECIFICATIONS
    • 416R Stainless Steel
    • 1:16 Twist
    • Chambered 9x19mm
    • Compatible with All Gen Glock Frames (Gen 4 requires use of adapter)
    • FRAME NOT INCLUDED
    • G17 Options Compatible with the following frames: 17, 17C, 17L, 22, 22C, 24, 24C, 31, 34, 35, and 37


    $949.99

    --------------------------------------------------

    Adams Arms VDI Enforcer Slide Assembly RMR Cut (Glock 17)



    The VooDoo Innovations Glock 9mm Slide Assembly is designed as an improved drop-in fit for the Glock. The VDI Slide is profiled and lightened to reduce recipricol mass and decrease felt recoil. Our VDI Slides are cut from stainless steel with enhanced front and rear cocking serrations for improved manipulation and improved slide geometry to draw your eye to the front sight. The VDI Barrel is machined to tighter fitment tolerances to increase accuracy potential without the need of gunsmith fitting. The barrel features a SAAMI spec 9mm Match chambering, Match Grade Rifling to allow the use of any 9mm projectile (not just jacketed bullets), threaded ½ x 28 TPI for use with 9mm suppressors and compensators, machined from 416R stainless steel, and Finished in Voodoo Innovations LifeCoat process. Includes VDI Thread Protector. The Enforcer Model includes Micro Red Dot Relief Cut with Cover Plate and upgraded XS Sights Dot Sights.

    FEATURES

    Complete Replacement (9x19MM) Slide Assembly
    • Profiled and Lightened Slide to Reduce Reciprocal Mass and Decrease Felt Recoil
    • Enhanced Front and Rear Cocking Serrations for Improved Manipulation
    • Improved Slide Geometry to Draw Your Eye to the Front Sight
    • Threaded Barrel for Suppressor or Compensator Use
    • Billet Extractor
    • Includes XS Dot Suppressor-Height Sights
    • Micro Red Dot Relief Cut with Cover Plate
    • 3 recoil springs so you may tailor the gun to your shooting.
    • Green - Standard spring
    • Yellow - 5% lighter spring for subsonic ammunition
    • Red - 5% Stronger spring for +P ammunition


    9mm Match Grade Barrel
    • SAAMI Spec 9mm Match Chambering
    • Tighter Tolerances for Accuracy
    • Match Grade Rifling
    • Allows for use of any 9mm projectile, not just jacketed bullets
    • Threaded with Protector
    • ½ x 28 TPI for Compensators and Suppressors


    LifeCoat Finish
    • Melonite & PVD


    Made in the USA
    • Life-Time Warranty


    Micro Red Dot Relief Cut Options:
    • Trijicon RMR


    SPECIFICATIONS
    • 416R Stainless Steel
    • 1:16 Twist
    • Chambered 9x19mm
    • Compatible with All Gen Glock Frames (Gen 4 requires use of adapter)
    • FRAME NOT INCLUDED
    • G17 Options Compatible with the following frames: 17, 17C, 17L, 22, 22C, 24, 24C, 31, 34, 35, and 37


    $1,099.99

  2. #2
    CGN Regular
    Join Date
    Feb 2014
    Location
    Ontario
    Posts
    757
    any idea when you'll get more?

  3. #3
    CGN Regular 1-2-2's Avatar
    Join Date
    Mar 2014
    Location
    GWN
    Posts
    444
    Are these for gen 3 or 4?

  4. #4
    Expired Business Member
    Join Date
    Oct 2011
    Location
    Vancouver, BC
    Posts
    2,275
    Adams Arms got them to work with both the Gen 3 and Gen 4s

  5. #5
    GunNutz fever2857's Avatar
    Join Date
    Mar 2004
    Location
    Saskatchewan
    Posts
    57
    Is there any chance of just the stripped slide versions coming? I am interested in a brawler G19 and an Enforcer G17. Thanks
    We are here for a good time, not a long time.

  6. #6
    GunNutz fever2857's Avatar
    Join Date
    Mar 2004
    Location
    Saskatchewan
    Posts
    57
    Or the new stripped slides from Polymer80? They look pretty decent too.
    We are here for a good time, not a long time.

  7. #7
    CGN Regular OldWays's Avatar
    Join Date
    Jun 2012
    Location
    Southern Alberta
    Posts
    909
    Any change on the mRR8.5SC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •