My buddy has some saved up for the Zombie invasion I may need to borrow some.Originally Posted by harbl_the_cat
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
My buddy has some saved up for the Zombie invasion I may need to borrow some.
If these are the same as the last batch to come in, the chambering is 5.56mm since the uppers are designed for military use (chrome/ FA Carrier properly staked/ Taper Pinned/ Bayonet Lug etc.) These were a great deal at $900 - 100% reliable, 99% interchangeable parts, shoot into 2" at 100 yards - they're incredible at $700, don't buy one, buy 2 - or as Hungry says, "your d*ck will fall off"
Last edited by enefgee; 04-17-2010 at 04:31 PM.
"In the days of my youth I was told what it means to be a man, Now I've reached that age if I do that stuff I'll end up in the can...."
Apologies to Led Zep
When you say 99% interchangeable, what parts of it is not compatible with other AR-15's?
when going to a magpul MOE front handgaurd you need a bit of dremeling to get it to fit.
The ambi-safety can be awkward to replace too, due to the way it's held together, that said apart from the safety I've got a Stag trigger/hammer in mine, a Hogue grip, MOE stock, Midwest FF rail and Vortex FH. You can have a ton of fun replacing parts, or run it stock - either way a terrific value.
"In the days of my youth I was told what it means to be a man, Now I've reached that age if I do that stuff I'll end up in the can...."
Apologies to Led Zep
I heard many stories about the quality of the ambi safety. And from the pictures I've seen, I would like to remove that as well when mine arrives. How hard is it to swap the safety out in a scale of 1/10 for someone that hasn't disassembled an AR before?
You'll need to take out the whole hammer/trigger system and pistol grip.
not too hard, about 5 on your scale.
read this:
h ttp://www.ar15.com/content/guides/assembly/lower/
newb question, what does the carry handle attach to, proprietary mounting points or a normal rail or some sort?
The upper receiver is a "flat-top" (railed)... the carry handle mounts on the rail, secured w/ thumb screws...
Only the dead have seen the end of war - Plato
If you replace the ambi safety does the selector then go into the right position? Remember something about a goofy safety or fire position on these.
Posting Permissions
