Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 48

Thread: Vltor CASV-14 Rail and QDM14 for M14

  1. #21
    CGN Ultra frequent flyer shawn's Avatar
    Join Date
    Apr 2004
    Location
    Kamloops, BC
    Posts
    12,108
    Less Internet more shipping my CASV-14!!!!

    Shawn

  2. #22
    CGN Regular
    Join Date
    Apr 2012
    Location
    cowtown
    Posts
    134
    Armtac, would there be a package price for the stock, rail system and the lower rail mount in the main picture? Thanks

  3. #23
    Expired Business Member
    Join Date
    Nov 2010
    Location
    Vancouver, BC
    Posts
    423
    It will be very hard for us to offer the package at this moment. For 4 months, we still don;t have an ETA for the stock.

  4. #24
    CGN Regular
    Join Date
    Feb 2012
    Posts
    484
    Dose anyone know if the Norinco made M305's would work with this? It looks so good I might just have to jump on that CanAmmo deal.

  5. #25
    Expired Business Member
    Join Date
    Nov 2010
    Location
    Vancouver, BC
    Posts
    423
    This should fit the Norinco M305. It will be better if someone who have a norinco chime in. We don't have a Norinco to try it on yet.

  6. #26
    CGN Regular
    Join Date
    Apr 2012
    Location
    cowtown
    Posts
    134
    That's what i was going to put it on, thanks Armtac on the info about my inquiries.

  7. #27
    CGN Ultra frequent flyer shawn's Avatar
    Join Date
    Apr 2004
    Location
    Kamloops, BC
    Posts
    12,108
    Quote Originally Posted by Armtac View Post
    This should fit the Norinco M305. It will be better if someone who have a norinco chime in. We don't have a Norinco to try it on yet.
    You can go back to the internet now I got my shipping notification.

    And I will let you know if it works, I plan on running it on my M305.

    Shawn

  8. #28
    CGN Ultra frequent flyer shawn's Avatar
    Join Date
    Apr 2004
    Location
    Kamloops, BC
    Posts
    12,108
    So I ordered on the 21st and got it today, 3 days before the suggest arrival date I might add.

    This thing is super cool.

    Here is how it came:



    What was in the box:



    And a few pics of the rail:






    And finally the instruction so you can get an idea of how it mounts up:




    I will post up more info once I get it mounted and play with it a bit. Let me know if you want any other photos or info.

    Shawn

  9. #29
    Expired Business Member
    Join Date
    Nov 2010
    Location
    Vancouver, BC
    Posts
    423
    Thanks for posting the information.

  10. #30
    CGN Ultra frequent flyer shawn's Avatar
    Join Date
    Apr 2004
    Location
    Kamloops, BC
    Posts
    12,108
    Well, I ran into an issue but it was rifle related. The op-rod guide it not exactly where it should be. It is about 1mm to far to the rear.

    Here you can see the notch for the roll pin is not centered:



    This is how it sits now, notice the uneven shinny metal on either side:



    This is where it needs to be, notice the material inside the hole:



    So make sure you check this before ordering, this mount as the mount is a precision piece and your rifle may not be.

    The min distance from the lip of the receiver to the receiver side of the op-rod guide needs to be 6 7/16" or greater.

    The max distance from the receiver lip to the muzzle side of the op-rod guide need to be 7 1/16 or less.

    *These measurement are as close as I could get with my tape, I don't have precision measuring tools for this large measurements*

    Now anyone have any ideas on how I can move this slot? I was thinking of filling it in with jb weld and re drilling it.

    Shawn

Page 3 of 5 FirstFirst 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •