Less Internet more shipping my CASV-14!!!!
Shawn
Less Internet more shipping my CASV-14!!!!
Shawn
Armtac, would there be a package price for the stock, rail system and the lower rail mount in the main picture? Thanks
It will be very hard for us to offer the package at this moment. For 4 months, we still don;t have an ETA for the stock.
Dose anyone know if the Norinco made M305's would work with this? It looks so good I might just have to jump on that CanAmmo deal.
This should fit the Norinco M305. It will be better if someone who have a norinco chime in. We don't have a Norinco to try it on yet.
That's what i was going to put it on, thanks Armtac on the info about my inquiries.
So I ordered on the 21st and got it today, 3 days before the suggest arrival date I might add.
This thing is super cool.
Here is how it came:
What was in the box:
And a few pics of the rail:
And finally the instruction so you can get an idea of how it mounts up:
I will post up more info once I get it mounted and play with it a bit. Let me know if you want any other photos or info.
Shawn
Thanks for posting the information.
Well, I ran into an issue but it was rifle related. The op-rod guide it not exactly where it should be. It is about 1mm to far to the rear.
Here you can see the notch for the roll pin is not centered:
This is how it sits now, notice the uneven shinny metal on either side:
This is where it needs to be, notice the material inside the hole:
So make sure you check this before ordering, this mount as the mount is a precision piece and your rifle may not be.
The min distance from the lip of the receiver to the receiver side of the op-rod guide needs to be 6 7/16" or greater.
The max distance from the receiver lip to the muzzle side of the op-rod guide need to be 7 1/16 or less.
*These measurement are as close as I could get with my tape, I don't have precision measuring tools for this large measurements*
Now anyone have any ideas on how I can move this slot? I was thinking of filling it in with jb weld and re drilling it.
Shawn