Hello ,
I recently acquired a new M&P 9mm Pro Series 5" barrel. I was wondering if anybody has recommended reloading recipes/ data that they could share?
Thanks,
M&P 9mm ProSeriesShooter
Hello ,
I recently acquired a new M&P 9mm Pro Series 5" barrel. I was wondering if anybody has recommended reloading recipes/ data that they could share?
Thanks,
M&P 9mm ProSeriesShooter
147 gr. RN FMJ with 3.6 grains of Bullseye and usually cci primers
works awesome in my MP9
The Liberal Philosophy
If it moves, tax it. If it keeps moving, regulate it. If it stops moving, subsidize it.
"any society that would give up a little liberty to gain a little security will deserve neither and lose both."
Benjamin Franklin
5.1 \ 5.2 gr Ramshot Silhouette behind BDX 124gr @ 1.125.. great grouping, very clean burning
The most important part of supporting a sport...... "Showing Up"
I am running 124 fmj roundnose with titegroup powder should i be running in between 4.1 grains to 4.4 grains of powder? any thoughts?
The most important part of supporting a sport...... "Showing Up"
I have loaded Speer 124 gr TMJ RN using 4.2 gr of Bullseye seated at OAL 1.135" for my 1911 and FNP9 and my CZ 75 SP01 Shadow. Also tried Aim's Projectiles 124 gr RN with the same specs except the OAL on the SHADOW, only works fine when seated at 1.075".
Any recommendations/recipes for the following projectiles and powder:
Cactus Plains 124 gr Lead Round Nose for Bullseye, Clays and Titegroup?
Rainier 124 gr Hollow Point for Bullseye, Clays and Titegroup?
I may be missing something but is this not the North Sylva forum?