Results 1 to 10 of 10

Thread: Reloading for M&P 9mm Pro series

  1. #1

    Reloading for M&P 9mm Pro series

    Hello ,

    I recently acquired a new M&P 9mm Pro Series 5" barrel. I was wondering if anybody has recommended reloading recipes/ data that they could share?

    Thanks,

    M&P 9mm ProSeriesShooter

  2. #2
    Member Prankster's Avatar
    Join Date
    Oct 2011
    Posts
    30
    I load a Berrys 147 RN with 4.2 Titegroup @ 1.17 OAL..........I can just hear everyone now................4.2 is way to much..........but I want the steel to fall everytime..........primers look good and it runs flawless.

    Quote Originally Posted by M&P 9mm ProSeriesShooter View Post
    Hello ,

    I recently acquired a new M&P 9mm Pro Series 5" barrel. I was wondering if anybody has recommended reloading recipes/ data that they could share?

    Thanks,

    M&P 9mm ProSeriesShooter

  3. #3
    CGN frequent flyer
    Join Date
    Aug 2010
    Posts
    1,590
    147 gr. RN FMJ with 3.6 grains of Bullseye and usually cci primers

    works awesome in my MP9
    The Liberal Philosophy
    If it moves, tax it. If it keeps moving, regulate it. If it stops moving, subsidize it.

    "any society that would give up a little liberty to gain a little security will deserve neither and lose both."
    Benjamin Franklin

  4. #4
    CGN Regular ciPeterF's Avatar
    Join Date
    May 2007
    Location
    Saskatoon
    Posts
    383
    5.1 \ 5.2 gr Ramshot Silhouette behind BDX 124gr @ 1.125.. great grouping, very clean burning
    The most important part of supporting a sport...... "Showing Up"

  5. #5
    I am running 124 fmj roundnose with titegroup powder should i be running in between 4.1 grains to 4.4 grains of powder? any thoughts?

  6. #6
    CGN Regular ciPeterF's Avatar
    Join Date
    May 2007
    Location
    Saskatoon
    Posts
    383
    The most important part of supporting a sport...... "Showing Up"

  7. #7
    Member moikya's Avatar
    Join Date
    Jun 2007
    Posts
    55
    I have loaded Speer 124 gr TMJ RN using 4.2 gr of Bullseye seated at OAL 1.135" for my 1911 and FNP9 and my CZ 75 SP01 Shadow. Also tried Aim's Projectiles 124 gr RN with the same specs except the OAL on the SHADOW, only works fine when seated at 1.075".

    Any recommendations/recipes for the following projectiles and powder:

    Cactus Plains 124 gr Lead Round Nose for Bullseye, Clays and Titegroup?

    Rainier 124 gr Hollow Point for Bullseye, Clays and Titegroup?

  8. #8
    Newbie browningsteve's Avatar
    Join Date
    Mar 2009
    Location
    Ottawa Area
    Posts
    14
    4.0 Gr HP-38 with 147 Fontier TMJ OAL 1.115

  9. #9
    CGN Regular ThorInc's Avatar
    Join Date
    Dec 2011
    Location
    Canada
    Posts
    763
    I may be missing something but is this not the North Sylva forum?


  10. #10
    Member Prankster's Avatar
    Join Date
    Oct 2011
    Posts
    30
    Yup...he obviously posted in the wrong section............should we all be d!cks and not answer his question because of that ?


    Quote Originally Posted by ThorInc View Post
    I may be missing something but is this not the North Sylva forum?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •