$vboptions[bbtitle]

Results 1 to 2 of 2

Thread: CDM Gear Shotgun light mounts clamps

  1. #1
    Supporting Dealer badboybeeson's Avatar
    Join Date
    Mar 2004
    Location
    East ontario
    Posts
    6,719

    CDM Gear Shotgun light mounts clamps

    we have a shipment of CDM gear shipping to us, CDM gear i sold out already as i grabbed what was left, next shipment after this one will be december so grab them while you can .
    place your orders and we will bill when ready to shipp.

    The MTC is the latest offering in the MT series of clamps for 1" lights. This 2oz. clamp fits in a 1/2" of space so it is perfect for the Mossberg 590A1 and just about any other shotgun with a 1" magazine tube and room to mount it. This mount can be positioned 2 ways, left or right, and provides a solid "lock up" around the mag tube. Each position allows for a sling to be used with the included sling mount/hand stop. Additionally there is provision for a QD push button sling swivel or a sling swivel stud. Manufacturered from aircraft grade aluminum and hard coat anodized it is a superior mounting solution for those with limited space or under the gun mounting requirements. One tool for one bolt is all that is needed to attach and remove the clamp or light in seconds



    The MTR is the latest offering in the MT series of clamps for lights with built in attachment points. This clamp 1.7oz clamp fits in a 1/2" of space so it is perfect for the Mossberg 590A1 and just about any other shotgun with a 1" magazine tube and room to mount it. This mount can be positioned 2 ways, left, or right, and provides a solid "lock up" around the mag tube. Each position allows for a sling to be used with the included sling mount/hand stop. Additionally there is provision for a QD push button sling swivel or a sling swivel stud. Manufacturered from aircraft grade aluminum and hard coat anodized it is a superior mounting solution for those with limited space or under the gun mounting requirements. One tool for one bolt is all that is needed to attach and remove the clamp or light in seconds. 1.7oz



    The BMT clamp is lighter than the factory Remington stamped steel clamp that comes on the Remington 870 with an extended magazine tube. You can mount a variety of rails and sling mount systems on this clamp. This clamp holds the light between the barrel and magazine tube for fingertip actuation of lights on either the left or right side of the shotgun without blocking your periferal sight picture. It can use 6 slot or 3 slot rails to put the light and clamp exactly where you need it.One tool for one bolt is all that is needed to attach and remove this clamp in seconds. Includes 3M polyurethane no slip grip to protect your finish




    The Patent Pending MOD-C is a superior, light weight clamp (weighs only 1.6oz) is small and compact enough to reduce your shotgun profile so it reduces hang ups and snags. Spaced between the barrel and magazine tube it will not block your peripheral sight picture. Manufactured from aluminum and hard coat anodized, it will not crack or break no matter how hard you tighten it down. One tool for one bolt is all that is needed to attach and remove this clamp in seconds. A steel threaded insert assures you won't strip a thread. Includes 3M polyurethane no slip grip to protect your finish


  2. #2
    Supporting Dealer badboybeeson's Avatar
    Join Date
    Mar 2004
    Location
    East ontario
    Posts
    6,719
    Another large shipment is arriving tomorrow
    Licensed firearms retailer
    We are offering quality Mil Serp Firearms as well as CustomBuilt Tactical Firearms
    www.sjhardware.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
collapse blockhead options_correctBookmarks