Pietta in 45 ACP?

Alex_Zues

Alex_Zues

CGN Regular
Location
Sasquatchewan, the flat part
I noticed you've recently begun stirring up your Pietta revolvers.
A while a go you mentioned you were getting in 1873 SAAs with cylinders to allow both 45 LC and 45ACP. I called today and was told nothing in 45ACP has arrived yet.
Are those still on the way? 45 ACP ammunition is much easier for me to get a hold of.
Cheers, Al

http://www.canadiangunnutz.com/forum/showthread.php/908412-New-arrivals

johnone said:
Check out the Pietta section of our site....

We just received a major shipment of black powder revolvers and a large number the "Colt" 1873 single actions in everything from .22lr through .45 LC

Many new models of .22lr/.22rfm and .45 LC/.45acp combo guns.... New videos soon....

John
Click to expand...
 
Alex_Zues said:
I noticed you've recently begun stirring up your Pietta revolvers.
A while a go you mentioned you were getting in 1873 SAAs with cylinders to allow both 45 LC and 45ACP. I called today and was told nothing in 45ACP has arrived yet.
Are those still on the way? 45 ACP ammunition is much easier for me to get a hold of.
Cheers, Al

http://www.canadiangunnutz.com/forum/showthread.php/908412-New-arrivals
Click to expand...

We are expecting those in our next major shipment, Nov/Dec
Marstar
 
Very good John,
will Pietta also be sending a spare .45 Colt cylinder for my Tombstone ? Frank said he would forward my emails about this to you, but I haven't received a reply yet. I received an email from Alessandro Pietta on Monday that he would ensure this is taken care of. Thanks and looking forward to hearing from you,
Randall
 
Mr Bear said:
Very good John,
will Pietta also be sending a spare .45 Colt cylinder for my Tombstone ? Frank said he would forward my emails about this to you, but I haven't received a reply yet. I received an email from Alessandro Pietta on Monday that he would ensure this is taken care of. Thanks and looking forward to hearing from you,
Randall
Click to expand...

I'm sorry but I cannot find anything in my "to do file" for any client called Mr Bear, perhaps you have another name ??
John
 
MR BEAR;

Good Morning Randall;
Further to you telephone call of a few moments ago regarding the concerns you have.

Since this was started here in the forum I will reply to your concerns here....

Yes you contacted Frank by e mail on Sept 18th to discuss the scratches on the cylinder of one of your revolvers.... This after you replaced many of the inner components and your attempt "to open up the bolt slightly " Frank agreed to look into it

On September 19th you sent a further e mail to Frank regarding the scratches on the cylinder of your revolver.... Frank immediately processed a warranty form so that we could ship you a replacement

On Friday the 20th of September you followed up with a phone call to Frank claiming that he was not acting fast enough.... He assured you that he was processing the claim....

On the same day (Sept 20th) because you considered our service too slow you chose to complain to Pietta in Italy, claiming that our service was not satisfactory

Today you called me to further complain about our service, you did explain that you posted here and sent a letter to Italy to "light a fire under us" .... I did make every effort to explain that only a very short time had elapsed since your initial contact and that we are acting upon it, this appears to be unsatisfactory....

I further assured you that we would be sending out a new cylinder to you and advise you that it may require fitting, you said that that was not a problem....

Now I ask you sir, what could we have done better to make you happy, the time from your initial contact (Sept18th) until the completed processing of the warranty claim (Sept 25th) was a a week including a week-end....

Of course, as I told you, if the replacement of your part for damage you caused, is not satisfactory we do guaranty everything we sell, you may return the revolver for a full refund....
John
 
WoW!
John you are a bigger man than me. That 4 sure cause I would have told him to blow goats and pound that sand.
johnone said:
MR BEAR;

Good Morning Randall;
Further to you telephone call of a few moments ago regarding the concerns you have.

Since this was started here in the forum I will reply to your concerns here....

Yes you contacted Frank by e mail on Sept 18th to discuss the scratches on the cylinder of one of your revolvers.... This after you replaced many of the inner components and your attempt "to open up the bolt slightly " Frank agreed to look into it

On September 19th you sent a further e mail to Frank regarding the scratches on the cylinder of your revolver.... Frank immediately processed a warranty form so that we could ship you a replacement

On Friday the 20th of September you followed up with a phone call to Frank claiming that he was not acting fast enough.... He assured you that he was processing the claim....

On the same day (Sept 20th) because you considered our service too slow you chose to complain to Pietta in Italy, claiming that our service was not satisfactory

Today you called me to further complain about our service, you did explain that you posted here and sent a letter to Italy to "light a fire under us" .... I did make every effort to explain that only a very short time had elapsed since your initial contact and that we are acting upon it, this appears to be unsatisfactory....

I further assured you that we would be sending out a new cylinder to you and advise you that it may require fitting, you said that that was not a problem....

Now I ask you sir, what could we have done better to make you happy, the time from your initial contact (Sept18th) until the completed processing of the warranty claim (Sept 25th) was a a week including a week-end....

Of course, as I told you, if the replacement of your part for damage you caused, is not satisfactory we do guaranty everything we sell, you may return the revolver for a full refund....
John
Click to expand...
 
Dear John,
thanks for your energetic response, makes me feel like one of the family... I am glad that you are giving this matter your personal attention. Since you asked, you could try acknowledging repeat customers' emails so that they are kept informed. Looking forward to our continued relationship in the Canadian firearms family. Thanks,
Randall
 
:pirate:John, that was very fast, I am impressed, thank you. Got it this morning, it's all fitted up nice and the original is on it's way to Very Pleasant Corner as we speak. Great service John, I'll definitely be back. :pirate:
johnone said:
MR BEAR;

Good Morning Randall;
Further to you telephone call of a few moments ago regarding the concerns you have.

Since this was started here in the forum I will reply to your concerns here....

Yes you contacted Frank by e mail on Sept 18th to discuss the scratches on the cylinder of one of your revolvers.... This after you replaced many of the inner components and your attempt "to open up the bolt slightly " Frank agreed to look into it

On September 19th you sent a further e mail to Frank regarding the scratches on the cylinder of your revolver.... Frank immediately processed a warranty form so that we could ship you a replacement

On Friday the 20th of September you followed up with a phone call to Frank claiming that he was not acting fast enough.... He assured you that he was processing the claim....

On the same day (Sept 20th) because you considered our service too slow you chose to complain to Pietta in Italy, claiming that our service was not satisfactory

Today you called me to further complain about our service, you did explain that you posted here and sent a letter to Italy to "light a fire under us" .... I did make every effort to explain that only a very short time had elapsed since your initial contact and that we are acting upon it, this appears to be unsatisfactory....

I further assured you that we would be sending out a new cylinder to you and advise you that it may require fitting, you said that that was not a problem....

Now I ask you sir, what could we have done better to make you happy, the time from your initial contact (Sept18th) until the completed processing of the warranty claim (Sept 25th) was a a week including a week-end....

Of course, as I told you, if the replacement of your part for damage you caused, is not satisfactory we do guaranty everything we sell, you may return the revolver for a full refund....
John
Click to expand...
 
Mr Johnone

I sent you a PM. Would you be kind enough to look at it.

I bought a Norinco .45ACP from John and it is up to the quality and service I was expecting no problemo.

Do understand ME I have no problemo, my Zombie Friends THEY have a problem now.


Have a Nice Zombie Day
 
You just gotta quit smoking that stuff


stac50bmg said:
Mr Johnone

I sent you a PM. Would you be kind enough to look at it.

I bought a Norinco .45ACP from John and it is up to the quality and service I was expecting no problemo.

Do understand ME I have no problemo, my Zombie Friends THEY have a problem now.


Have a Nice Zombie Day
Click to expand...
 
Hey randall!

You are a f$#king c$nt ! there I said it so the dealer wouldn't have to. you stupid F45k go play in traffic you selfish ingrate! people like you make me sick! so impatient and inconsiderate of others or what they are trying to do for you! Go swan dive off an overpass we have far to many people like you in this world! F#ck you very much sir!:rockO:HR::HR:n::slap:
 
You must log in or register to reply here.
Back
Top Bottom