I had the exact same problem with these mags. Swapped out the spring and follower from one of my LAR mags and it held. All 5 of the mags I bought had the same problem. Bad batch of springs maybe?
I had the exact same problem with these mags. Swapped out the spring and follower from one of my LAR mags and it held. All 5 of the mags I bought had the same problem. Bad batch of springs maybe?
I have had a couple feeding issues as well.
Springs you say...Hmmmmm.
Seemed to fix the problem for me. I was having an issue with the bolt not holding open and a couple failures to feed too. I love the look and feel of them, so I might try and find replacement pieces from magpul or just steal the springs from the rest of my LAR mags. Hope this helps, if you figure out an easier fix let me know!
I heard a little birdy and he told me a tale. He told me that it might not be long before these are back in for sale.
If you have any questions please call or e-mail:
Phone: (204) 748-2454
E-mail: sales@wolverinesupplies.com Retail Sales
Any update on more of these in stock soon?
Mercy to the wolf is cruelty to the sheep
They appear to be in stock:
http://www.wolverinesupplies.com/det...-Magazine.aspx
Tagged
Do these mags have anti tilt followers? Or are they basically built the same way as the 5rnd factory mags? I have four factory 5rnd mags, (three that i bought from Wolverine) they are garbage and i threw them in the shed with a pile of garbage in the corner...sucks that i paid $25 a piece for them. I can shoot all day using PMAGS but as soon as i use factory mags i have continuous jams. I am eager to hear how these pistol mags work in an XCR-M.
no anti tilt followers, seem to feed okay, ran maybe 5 mags through it
if you are having problems with some of the old five rounders, there are two things to do, first, check the spring and make sure it isn't in backwards, there were some left the factory that way and put the pressure incorrectly on the follower and second take a little file and slope the 90 degree part at the back of the follower that the shells sit on, that will improve the functioning as well.
If you have any questions please call or e-mail:
Phone: (204) 748-2454
E-mail: sales@wolverinesupplies.com Retail Sales