Black Friday sale / Cyber Monday...

[st1264]

Yes

How much are the chokes?

[gxxrman]

How much are the chokes?

50 bucks give or take check the site for prices

[krausb]

Fabarm Pro Forces 14" (what we both bought) is threaded for chokes?

Yes, but unlike the STF/12 the Marital series have external threads as opposed to internal threads. So the chokes are all extensions like the breaching device rather than threading inside the barrel, if that makes sense at all.

[sandermar]

Glad so many had the chance to take advantage.

Except for the NEA 18" rifles, we still have a bit of everything else left for the sale stuff.

We will also be adding some new stuff tomorrow am. Such as a couple of SIG deals.

JR

Sent an email to the web sales address on Friday trying to get some of those small and large primers you had on sale but never heard anything back. Any chance you still have some on sale and in stock?

[TSE JR]

Sent an email to the web sales address on Friday trying to get some of those small and large primers you had on sale but never heard anything back. Any chance you still have some on sale and in stock?

We have no large primers, but we will have some small primers left. 10,000 is the max per person.

If you email me or websales your name and phone #, I can check what they pulled for you and follow up.

JR

[st1264]

Yes, but unlike the STF/12 the Marital series have external threads as opposed to internal threads. So the chokes are all extensions like the breaching device rather than threading inside the barrel, if that makes sense at all.

So would this be the correct Muzzle Brake for the Martial Pro Forces?



http://theshootingedge.com/store/ind...roducts_id=975

"Multichoke system" chokes would be the correct ones?



http://theshootingedge.com/store/ind...roducts_id=978

[krausb]

That is the exact muzzle brake for the Martial series! and to the best of my recollection, those are indeed the corresponding chokes.

[st1264]

That is the exact muzzle brake for the Martial series! and to the best of my recollection, those are indeed the corresponding chokes.

So when I get mine, I'm under the assumption that the there is a cap on the threads (hard to tell from the pic)? I know many people don't like muzzle brakes but I have one on my Mossy that seems to reduce felt recoil by quite a bit. Anyone know the approx length of the brake?

[krausb]

Yeah, it is hard to see, but the end of the barrel is threaded and has a thread protector. The muzzle brake is technically a breaching device designed to allow gases to escape when the muzzle is in direct contact with an object. Some people say it does indeed have some effect as a muzzle brake, but the few time that I shot a 14" fabarm wiht one installed, I was hard pressed to tell the difference between it and my brake-less 14" Fabarm. But that might just be me... or maybe the ammo we were shooting on those particular days, YMMV.

Going from memory, I'd guesstimate the brake itself to be about 3 and a quarter to 3 and a half inches long, or thereabouts.

[st1264]

Going from memory, I'd guesstimate the brake itself to be about 3 and a quarter to 3 and a half inches long, or thereabouts.

Ouch... that kind of defeats the purpose of buying a short 14" barrel, doesn't it? Of course it's removable. Thought it was around 2" or so.