grizzly shotguns

[donkSTRIKER]

whats it doing if you don't mind me asking

edit: seems like it's just mine - others report smooth operation.


mine jams on every first round, and jams occasionally on the remaining shots as well. Seems to happen because the magazine fits so loosely.

The mag sags under it's own weight about a 1/4" lower than it should be, as a result the first shell jams up against the metal flat spot below the chamber (right under the angled piece that is supposed to push the shell up).

Quite dissapointed, but hoping I just got a bad one. Still waiting to hear back from CanAm and I'm sure they are still busy processing orders.

These pics show the play in the mag. First pic feeds normally, second pic jams. The position in the 2nd pic happens under it's own weight.



Will certainly try another good cleaning and greasing. In the meantime I can't trust this gun to feed on a fresh mag, which means for now, it's a piece of junk.

[firestorm79]

Have you heard from CanAm on this?

mine jams on every first round, and jams occasionally on the remaining shots as well. Seems to happen because the magazine fits so loosely.

The mag sags under it's own weight about a 1/4" lower than it should be, as a result the first shell jams up against the metal flat spot below the chamber (right under the angled piece that is supposed to push the shell up).

Quite dissapointed, but hoping I just got a bad one. Still waiting to hear back from CanAm and I'm sure they are still busy processing orders.

These pics show the play in the mag. First pic feeds normally, second pic jams. The position in the 2nd pic happens under it's own weight.

Will certainly try another good cleaning and greasing. In the meantime I can't trust this gun to feed on a fresh mag, which means for now, it's a piece of junk.

[donkSTRIKER]

Yeah it appears their first response went to my junk folder which was why I was still waiting. I'm going to get it out to the range this weekend and try their suggestions, if I can't get it going I'll be sending it back.

For the record I have nothing bad to say about CanadaAmmo or the grizzly - was just asking if anyone else had issues. I have edited my post as to not scare anyone off!

[luke s]

edit: seems like it's just mine - others report smooth operation.


mine jams on every first round, and jams occasionally on the remaining shots as well. Seems to happen because the magazine fits so loosely.

The mag sags under it's own weight about a 1/4" lower than it should be, as a result the first shell jams up against the metal flat spot below the chamber (right under the angled piece that is supposed to push the shell up).

Quite dissapointed, but hoping I just got a bad one. Still waiting to hear back from CanAm and I'm sure they are still busy processing orders.

These pics show the play in the mag. First pic feeds normally, second pic jams. The position in the 2nd pic happens under it's own weight.



Will certainly try another good cleaning and greasing. In the meantime I can't trust this gun to feed on a fresh mag, which means for now, it's a piece of junk.

that is weird, 2 different mags? I just checked mine and it doesnt hang low, but the 1st shell occasionally gets stuck in the same place you described.

a good slap tilts it up where it needs to be

[firestorm79]

Yeah it appears their first response went to my junk folder which was why I was still waiting. I'm going to get it out to the range this weekend and try their suggestions, if I can't get it going I'll be sending it back.

For the record I have nothing bad to say about CanadaAmmo or the grizzly - was just asking if anyone else had issues. I have edited my post as to not scare anyone off!

What suggestions were made to correct the problem? I have the occasional misfeed as well.

[donkSTRIKER]

What suggestions were made to correct the problem? I have the occasional misfeed as well.

basically just a really good slap when seating the mag, and I'm going to try a little extra lubricant as well. to be honest I'm not sure if it's going to solve my issue based on how loose the mag is, but I'm going to get it out to the range and try.

[Duffk21]

Phoenix in edmonton just got a shipment a couple days ago.

[Dweano]

12.5 barrel works just fine for skeets. Just as good as my friends 11-87 26 inch barrel (28 maybe). It was fun fun fun!! Very swingable haha. I have one low hanging mag but it works good still usually (the one it came with actually. The three I bought seperate worked fine).

[GtpSpecialEdition]

I Just got it and I am very happy sofar. I ran a bunch of my crappy snap caps through it and not one hang up even tryed with the first round in a bad position and not a prob with any of the mags yet...but real shells will tell the real tale.


Tossed my fore grip on it, a little clean, oil job and ready to go! Hope it works well in the bush, Oh and ya it's fricken heavy!

Thanks CanAm!

[Danimal247]

A lot of the weight in my 12.5" tube was from the stock, I replaced it with hogue and it's significantly lighter