TAKING PRE-ORDERS FOR FEB, last batch able to order , all orders in by midnight tonight Jan 11, no more available after these
HAVE 1 10.5 UPPER LEFT IN STOCK UNSPOKEN FOR FOR IMMEDIATE SHIPPING
PURCHASE 10.5 UPPER HEREl 1 left for immediate sale
PURCHASE 15.7 UPPER HERE
Attachment 67975
Attachment 67976
PRE ORDERS FOR NOV DELIVERY , FREE SHIPPING APPLIES, will not be charged until ready to ship
10.5 & 15.7Integrated Upper Receiver With BCG and Charge Handle
Colt Canada British Special Forces 3rd Gen Integrated Upper Receiver’s
NOT SURPLUS OR OVER RUNS
DESCRIPTION:
GEN 3 (current PRODUCTION Military) Integrated Upper Receiver (IUR):
Made for the UK Special Forces
Interchangeable fit on all Mil-Spec “push pin" lowers;
Fully floating barrel system;
Dry film lubricated bolt carrier channel;
Screw retained (easily maintained) low profile gas block (under the handguard for safety);
Mil-Spec hard anodized black;
IUR is marked COLT CANADA 2C085 and NATO on the rail;
Straight gas tube to increase life and ease of installation.
BARREL:
Iconic “Colt Canada” cold hammer forged in your choice of 10.5” or 15.7” fully chrome lined barrel;
Canadian Forces Spec thicker chrome;
Phosphated to Mil-Spec;
Improved integral forged carbine chamber;
Colt Canada hammer forged choke bore;
1/7” twist RH/ 6 groove NATO approved bore;
Batch marked barrel and barrel extension;
High pressure tested HPT and magnetic particle inspection MPI as per Canadian Mil-Spec;
Anti corrosion coating applied under the handguards;
New liner to improve thermal protection of hands.
FLASH HIDER:
Standard C7/C7A1/C8/C8A2 type half birdcage for compensation and flash reduction.
RAILS:
Full top and bottom rails (10.5” 37 top and 19 bottom, 15.7” 46 top and 28 bottom);
Reinforced grenade launcher recoil lug;
The side rails are partially railed with 10 slot front accessory mounting point and slotted sling fitting on each side
Rail slots are numbered with laser engraving;
The rails are NATO STANAG 4694 spec and are back compatible with MIL-STD-1913 accessories;
Protected low profile gas block;
IUR has a hardened steel insert for the cocking handle latch to resist wear with enlarged tactical latches
BOLT CARRIER ASSEMBLY:
Full Canadian Forces specification (Military configuration) bolt carrier assembly;
Proof tested, MPI inspected, and lot number controlled bolt;
CF spec high retention staking of the carrier key;
Chrome lined carrier and key for wear resistance;
Chromed firing pin.
COLT CANADA TACTICAL CHARGING HANDLE:
Extended ambidextrous Tactical Latch for easy cocking of your gun with optics in place;
Solid latch pin is permanently staked in place for worry free operations;
Mil-Spec finishes applied for weather resistance.