Sorry no plans for non-mag version
Lets just say that we learned a few lessons from the UTS-15 and permanently dropped it from our product line-up.
Dealers will be notified on Monday. Feel free to contact your local dealer about availability
***New to Canada*** SAP6 MAG-FED FLAT-TOP 11.4" 12GA Shotgun **NON-RESTRICTED**
- Thread starter Tactical Imports
- Start date
Sorry no plans for non-mag version
Lets just say that we learned a few lessons from the UTS-15 and permanently dropped it from our product line-up.
oneguywithsixguns
Regular
- Location
- Edmonton, Alberta
Any idea how long the gun would be with a 14"bbl and the stock pulled off? Also I'd love to be able to stick one of these in the muzzle
My review is now up here for all of you guys to read.
Cheers!
http://www.canadiangunnutz.com/forum/showthread.php/1123971-Mag-Fed-Dagger-SAP6-review
Cheers!
http://www.canadiangunnutz.com/forum/showthread.php/1123971-Mag-Fed-Dagger-SAP6-review
Yep, nothing is used in that space. Perfect for bacon
Hex screws attach the rail to the receiver. The two screws that attach to the receiver need to be removed in order to remove the barrel
Mmmm... tactical bacon... Shoot enough slugs and it will even heat them up for you!
PitBull1973
CGN Ultra frequent flyer
- Location
- Right Behind You
Kevin is that you shooting if so well done.
Mauro
Mauro
Yup, that's me, and actually it was only my 3rd and 4th magazines through the gun. Thanks for the kind words!
PitBull1973
CGN Ultra frequent flyer
- Location
- Right Behind You
I was also hoping to see how it hits the target with different loads , like buck shot or 7.5 which is used a lot for three gun?
Yup, we'll be brining in spare 14" bbls threaded for chokes.
The main model will continue to have an 11.4" bbl, the 14" bbl will be an optional upgrade
oneguywithsixguns
Regular
- Location
- Edmonton, Alberta
When you say 'upgrade' does that mean we can buy it with the 14" bbl INSTEAD of the 11.4" Or will we have to buy with 11.4" and add the 14" ?
Last edited:
The foregrip is heavily stippled and indented for the hand and the forward pressure required to push the pump forward is significantly reduced due to the pump spring. The possibility of such an event is highly unlikely. In either case the optional 14" bbl will resolve any potential remaining concerns.I would not trust myself with that fore grip... I would shoot my hand off. Needs a loop or vertical grip IMHO, for guys like me
Cone_Skid_Cone
Regular
- Location
- Grande Prairie
Argh.. I went for a BAT mag fed. When the cheques build up I'll have to grab one of these guys for bear scare.
I'd really be sold if there was a 2-3" picatinny rail at the rear of the forend for a UTG quick detach vertical grip
I'd really be sold if there was a 2-3" picatinny rail at the rear of the forend for a UTG quick detach vertical grip
oneguywithsixguns
Regular
- Location
- Edmonton, Alberta
Could someone explain why we can have non restricted short barreled shotguns but not short barreled rifles? I thought they wee classified the same way.
Anybody feel free to correct me if I am wrong, but we do have SBR's. That said, unless you want it to be restricted, it can not be a semi auto. The barrel must also be produced at that length, not cut down as far as I know.
Cone_Skid_Cone
Regular
- Location
- Grande Prairie
^^
For more information, give a read through this article:
https://nfa.ca/resource-items/barrel-and-firearms-lengths
It isn't a government document, but it does seem fairly easy to understand by comparison. Not that anyone really understands government law and logic..
