Strap-on to stock cheek-rest

[Thiopento]

I recently picked up a nice precision rifle in a synthetic black polymer stock, however it's a bit low for a nice cheek weld looking through the scope, can anyone recommend a nice strap-on cheek rest for the stock ? Cheers

 

[TimHortonsCoffeeTarget]

I recently picked up a nice precision rifle in a synthetic black polymer stock, however it's a bit low for a nice cheek weld looking through the scope, can anyone recommend a nice strap-on cheek rest for the stock ? Cheers

Ive used this guys products its something different to think about, great guy deal with , Michael Godard @ God' A Grip Cheek Pads.

cheers!

 

[ticul]

http://www.bradleycheekrest.com/B24-Tactical-Black-B24-Tac-BLK.htm

 

[dero338]

Is there a reason why a strap on?
A Tac Pro take only minutes to install and a lot better in my opinion

 

[TAC PRO]

http://www.canadiangunnutz.com/forum/showthread.php/1244214-Cheek-riser-m14-m305?highlight=kydex+cheek+rest

 

[curseyou]

Triad tactical makes a great strap on cheek rest. Hi quality, inexpensive and it doesnt permanently alter your stock if your thinking of resale.

 

[Shawn_338]

Hornady makes a decent one for the money too

 

[Tenguns]

Voodoo makes a nice one.

 

[shatthatkilledelvis]

Triad tactical makes a great strap on cheek rest. Hi quality, inexpensive and it doesnt permanently alter your stock if your thinking of resale.

Yup...I have two. They are great

 

[Terry Perkins]

Is there a reason why a strap on?
A Tac Pro take only minutes to install and a lot better in my opinion

I agree.

 

[168bergersapper]

http://www.bradleycheekrest.com/B24-Tactical-Black-B24-Tac-BLK.htm

These are great. A lot of adjustment and very stable.

 

[ahlsy]

Any site sponsors carry Triad Tactical, or do I have to get them straight from Triad?

 

[peter pepper]

I was expecting something completely different from this thread...

 

[curseyou]

Ordering from triad is nice and easy. Great guys. Exchange now sucks though.

 

[skypilot]

I have tried a few however I always go back to neoprene layers held by hockey tape and an elastic sleeve cover such as Uncle Mike's shell holder or similar.

 

[I <3 M14]

Coyotem1a makes some very nice ones

 

[sniper58]

Look at the Blackhawk! nylon cheek pad.
I have 2 of them, one on my M-305 & the other on my K31.
If you lace them on tight, no movement and they're removable in seconds with no damage to the stock.
Got the second one for $24.00 off amazon.ca a couple of weeks ago.

 

[Ryan.M.Anderson]

I have tried a few however I always go back to neoprene layers held by hockey tape and an elastic sleeve cover such as Uncle Mike's shell holder or similar.

This solution is way better (IMO) and cheaper than anything else out there. I used the Triad tactical ones for a couple of years (still do on my 22) and they were good but I found they did move ever so slightly and that impacted consistency. I used a cut up mouse pad and some vetrap to make mine.

 

[sj250]

I got this one for my 700. Super cheap, extremely well made, and the part your cheek rests on is a suede type material which is nice for a long shooting session. I then got a piece of the foam pipe insulation and cut a chunk the same length as the cheek rest and layed it on the top of the stock before installing the cheek rest. Perfect alignment with my 50mm scope, super comfy and easily removable if needed. I can still remove the bolt with it on too.

http://www.amazon.ca/gp/product/B00M3UAUC8?psc=1&redirect=true&ref_=oh_aui_detailpage_o07_s01

 

[Jon.]

I have the strap on tac pro one for my m14. Fits like a glove.