m14 remington 700 archangle mags fit 20 rounds

[Brooker1]

just found out that the magazines for the archangel stock for Remington 700's In 308 will fit in m14's allowing full capacities for m14's

 

[buckbrush]

they are for a Rem. 700 not anything else.

 

[Brooker1]

they just so happen to fit in m14's but they do not have a last round hold open

 

[yomomma]

they are for a Rem. 700 not anything else.

Nuf said

 

[RifleDude]

They fit but don't feed worth a damn. The Archangel mag is a single feed at the top whereas the M14 mag is double, staggered feed. The M14 does not feed the rounds from the Archangel mag and causes a jam right away. I know because I tried it.

 

[Lowestform]

they are for a Rem. 700 not anything else.

Very wise words are being spoken here.

 

[JuicyFruit]

They fit but don't feed worth a damn. The Archangel mag is a single feed at the top whereas the M14 mag is double, staggered feed. The M14 does not feed the rounds from the Archangel mag and causes a jam right away. I know because I tried it.

They worked fine in my *remington 700*, I don't know why they didn't work in your *remington 700*. The bolt on the *remington 700* is a snug fit against the two feed lips on the magazine, run your bolt manually with the magazine in for a minute or two and the magazine will work in your *remington 700* just fine.

 

[Alpheus]

They worked fine in my *remington 700*, I don't know why they didn't work in your *remington 700*. The bolt on the *remington 700* is a snug fit against the two feed lips on the magazine, run your bolt manually with the magazine in for a minute or two and the magazine will work in your *remington 700* just fine.

He said the mags don't work in his M14.

 

[drift1122]

Hehehe

 

[JasonGTA]

shhhhhhhh they're watching

 

[zuke]

 

[D3vin]

So I need a mag for my Remington. Where can you buy these? PM me if it's a tin foil hat issue.

 

[serbinator]

are the archangel stocks any good ? does it give any significant improvement in accuracy compared to lets say a MDT HS3 chassis?

also would those 20rd mags fit in a MDT chassis or in a ruger Precision rifle?

 

[ThatM305Guy]

 

[Davy Crockett]

He said the mags don't work in his M14.

Too bad he doesn't have a *Remington 700* like juicyfruit.

 

[lerch641]

So I need a mag for my Remington. Where can you buy these? PM me if it's a tin foil hat issue.

I got mine from a site sponsor that's located across the Fraser River from Abbotsford, BC (I won't say specifics but you have the clues )

 

[Spankeroo]

 

[Odd Shot]

Face palm

 

[NewGunner7.62]

I didn't know these were around. anyone try one in a mvp yet

 

[supernova]

You'll all be in jail by morning.












And out by mid afternoon with all charges dropped and your property returned.