New Product Announcement - affordable 2 way radio

Canada Ammo

Canada Ammo

Business Rep
Location
Vancouver
The BAOFENG 888S TWO WAY RADIO is a great performing radio priced at only $19.99 Great choice for all your outdoor needs.

* Frequency: 400-469.995MHz
* 16 channel
* 1500mAh Li-ion battery
* 50 CTCSS/105 CDCSS
* VOX Function
* Voice Prompt
* PC Programming
* Emergency Alarm
* Intelligent Charging
* Battery Save
* Low Voltage Alert
* Time-out Timer
* FlashLight

image2_1_.jpg
 

Attachments

  • image2_1_.jpg
    image2_1_.jpg
    14 KB · Views: 2,317
czechsanchez said:
probably line of sight. Baofeng's UV-5r is very popular in the HAM radio and 4x4 community.
Click to expand...

Line of sight through a 40x scope :) I have 6 Baofeng UV-5Rs, they are the cheapest 5W dual band radio you can buy, but they perform very well provided it's not a dud out of the box. I had to return 2 that wouldn't turn on, the other 4 were fine. We use them for 4x4ing, hunting and just plain communicating around the cottage. The range is an EASY 20 km on the hwy (unobstructed line of sight) and a good 10KM in the bush, maybe more.
 
Great price for a 50cm rig. Google "CHIRP radio programming" and with a USB cord and few free downloads you can set it up for FRS frequencies or what-have-you. I just spent $100 to ship three UV-5r+ models from China. I could have had three of these and a jerry can!
 
wagnerb said:
Great price for a 50cm rig. Google "CHIRP radio programming" and with a USB cord and few free downloads you can set it up for FRS frequencies or what-have-you. I just spent $100 to ship three UV-5r+ models from China. I could have had three of these and a jerry can!
Click to expand...

You can go on the Radio Reference site and import the freq's for your area using the USB cord and CHIRP software.
 
Yes, if any frequency besides the FRS-GMRS channels are transmitted on. Listening to other's transmissions, like a railfan might, does not.
 
marcham said:
Are they Industry Canada certified? Early versions of these radios were not and caused dangerous RF burns.
Click to expand...

Explain what an RF burn is? I'm an Electrical/Electronics Engineer and have never heard of this.
The only way you could get burned might be to touch a part that gets too hot.
 
I really really miss FHSS radios that use to be on the market - should have stocked up while they were available. eXRS was good :(

CanAm, do you think you may get other radio options in the future, non GMRS or FRS?
 
You must log in or register to reply here.
Back
Top Bottom