9mm, 106mm non extended barrel, factory 10 rounder. What do we got?

V

VZsammy

Regular
EE Expired
Rating - 100%
79   0   0
Hi there, what do we have access to with those criteria?

- 9mm
- Original capacity of 10 rounds (mag not pinned or sticking out)
- Closest to 4.2 inches minimum length barrel (no extended barrel)

Closest one in 9mm I found would be a 1911 type gun.

Any ideas?
 
Last edited:
Where are you getting this "102mm" measurement?

The lowest limit for restricted is 106mm inclusive (4.2").

Most compact variants of major brands don't do a "canadian specific" 106mm barrel, with the newest Glock G19 the exception. Everything else usually has a third party barrel that sticks out more than 106mm, and has threading.

a quick search on your "P7M10" yields a barrel length of 105mm, hence prohib in canada, unless you can have it rebarreled to something 106mm+ before taking possession of it.
 
tharkhold said:
a quick search on your "P7M10" yields a barrel length of 105mm, hence prohib in canada, unless you can have it rebarreled to something 106mm+ before taking possession of it.
Click to expand...

Just have someone shoot it a bunch before they sell it to you. Carbon build up should give you that extra mm! LOL
 
tharkhold said:
Where are you getting this "102mm" measurement?

The lowest limit for restricted is 106mm inclusive (4.2").

Most compact variants of major brands don't do a "canadian specific" 106mm barrel, with the newest Glock G19 the exception. Everything else usually has a third party barrel that sticks out more than 106mm, and has threading.

a quick search on your "P7M10" yields a barrel length of 105mm, hence prohib in canada, unless you can have it rebarreled to something 106mm+ before taking possession of it.
Click to expand...

Thanks, edited post. Still wondering what stock gun is the closest thing.
 
I had a STI Spartan 1911 in 9mm. It's nice pistol, quite accurate and reliable.
The only reason I let it go was I was changing direction with my small collection.
They cost around 750-800.00
 
tharkhold said:
Where are you getting this "102mm" measurement?

The lowest limit for restricted is 106mm inclusive (4.2").

Most compact variants of major brands don't do a "canadian specific" 106mm barrel, with the newest Glock G19 the exception. Everything else usually has a third party barrel that sticks out more than 106mm, and has threading.

a quick search on your "P7M10" yields a barrel length of 105mm, hence prohib in canada, unless you can have it rebarreled to something 106mm+ before taking possession of it.
Click to expand...

HK P7's are actually deemed restricted according to the FRT. I'm not clear on the details but I think it has to do with how the barrels are measured. HK specs say they are 105mm....but by Canadian measurement standards they are 107.
 
Last edited:
Did some research and while it doesn't qualifies as a stock gun, I found the following quite interesting.

Chopping down a Full size model (4.25 barrel) grip to accept factory Compact magazines (10 rounds).

I didn't know it was possible, saw same thing with Glock 19 to Glock 26.
 
There are 2 FRTs for the HK P7M10. Original manufacturers spec is prohibited as 105mm bbl(19674-1) but the Non Commercial Customization with the 106mm is Restricted(19674-2).
dB
 
sig sp2022

VZsammy said:
Hi there, what do we have access to with those criteria?

- 9mm
- Original capacity of 10 rounds (mag not pinned or sticking out)
- Closest to 4.2 inches minimum length barrel (no extended barrel)

Closest one in 9mm I found would be a 1911 type gun.

Any ideas?
Click to expand...
 
the 3-4 HK P7,PSP, M13 have all been 106mm. most of these where just presumed to be 4 inch when all this started, then we started to actually measure
A Jericho 941 with the long slide, a canik TP9SF , should be lots more.
 
Interesting...HK specs from my owners manual show 105mm for all models. My registration says 107mm. Differing measurement techniques/standards?

Although, owner's manual seems pretty generic, maybe it just doesn't mention other types.
 
sailor723 said:
Interesting...HK specs from my owners manual show 105mm for all models. My registration says 107mm. Differing measurement techniques/standards?

Although, owner's manual seems pretty generic, maybe it just doesn't mention other types.
Click to expand...

You are correct. Mine was a 12(6) with a registered 105mm barrel originally. I had it re-verified after some knowledgeable Nutterz on here told me how to do it. Sent pics and info to the RCMP lab and they accepted the pics. The gun was re-classified as a restricted. Barrel length changed to 107mm and I sold the gun soon after.

I was going to recommend the P7M8 or M13 actually for the OP. The Boberg is another option except for the mag cap part.
 
VZsammy said:
Hi there, what do we have access to with those criteria?

- 9mm
- Original capacity of 10 rounds (mag not pinned or sticking out)
- Closest to 4.2 inches minimum length barrel (no extended barrel)

Closest one in 9mm I found would be a 1911 type gun.

Any ideas?
Click to expand...

M&P FS is 4.25" just 5/100th over your 4.2" limit. There are a few 1911 Commanders chambered in 9MM.

I am sure there are others.

Take Care

Bob
 
You must log in or register to reply here.
Back
Top Bottom