Benelli M4 full tube replacement

[Rx Arms Solutions]

Now you can have the Benelli M4 look the way it was intended. I’m in the final stages of finishing this project up, I should have 19-20 of these available for purchase initially. They are made from 4130 steel with a manganese phosphate finish. It expands the m4 capacity to 5 x 3”, and 6 x 2.75”.

I’ll be posting more info and pics as I have them. Thanks!

Sign up to get a notification email when they are in stock at rxarms.com

UPDATE:
Prototype parkerized photo

 

[call2arms]

Sounds promising

 

[Ironheart]

Price?

 

[VancouverS4]

Can you do 5.9 of 3”?

 

[Rx Arms Solutions]

Price?

In the 150 to 200 zone. Still TBD.

Regarding the 5.9” of 3”. It will be close to that, I am leaving enough room for 6 fold crimped buck shot, which are 2.35” long unfired. Target load are 2.25” unfired.

 

[Scarheart]

Interesting!

 

[JoKa]

Interested as well

 

[kapanak]

Curious to see as well.

 

[vp6111]

Compatible with Canuck Operator/Komando P4?

 

[Rx Arms Solutions]

Compatible with Canuck Operator/Komando P4?

From what I have seen, the threads into the reciever on the Turkish M4 are not the same as the M4. But I can certainly adjust easily if there is demand for it. I am only going off of pics I have seen, I haven’t seen the Turk in person.

 

[Rx Arms Solutions]

A little bit of turning footage

 

[Bonjour43ma]

Interested in one for the Sulun Arms Tac12 (same as the latest rebranded Canuck Operator version)!

 

[NeonGreen]

Interested in one for the Sulun Arms Tac12 (same as the latest rebranded Canuck Operator version)!

my goodness when will we settle on a name for the damn thing lol komando p4 canuck operator, turknelli, sulun tac12

im just going to get an import licence and call my model the flippity floppity floop master blaster 5000, sell it dirt cheap so all of you buy mine and the other guys stop selling them, then ill go out of business because i couldn't turn a profit, but at least the tipple F MB 5000 will be the permanent name for this freaking thing

 

[wolf300H&H]

Yes.

Interested for my soon to be in my hands Turknelli ?

We need more firepower !!!

 

[Bonjour43ma]

Actually, it seems that the M4 mag tube can thread onto the Tac12, as confirmed by the other vendor https://www.canadiangunnutz.com/forum/showthread.php/1915738-Turknelli-M4-is-HERE-AT-LAST!!!!-TAC-12-BY-Trigger-wholesale!!!!?p=16283033&viewfull=1#post16283033

So it should be a straight install. Hope the price is $150 or less.

 

[Rx Arms Solutions]

These are very close to completion, I will have 8 or 9 in my first batch. I won't be able to confirm that they thread onto any turkish version, but if the tube end cap screws onto the receiver tube threaded end, then it should work.

You can sign up at rxarms.com to get notified when they are in stock

 

[Rx Arms Solutions]

Picture of a parkerized version.... still not quite ready to deliver these but this is just a little taste

 

[SLANTO]

I’m looking forward to picking up one of these

 

[CanadianRouge]

Awesome!!!!

 

[Colossal Ursidae]

Would aluminum be too weak?
It’d be nice to get some weight savings