SBI 10/22 Barrels - 16.25'' and 12.5''

[SpectreBallistics]

SBI 10/22 Barrels

Enhance your shooting capabilities with our meticulously designed 10/22 barrel. Engineered and manufactured to deliver unparalleled performance, SBI 10/22 barrels optimally blend precision, resilience, and aesthetics. Our barrel contour has been refined for substantial weight reduction while maintaining impeccable accuracy and peak performance. Each barrel undergoes a nitride coating process, ensuring a robust, enduring finish that stands the test of time.

Barrel Specifications:

• 22LR caliber
• Bentz chamber
• 1:16 twist rate
• 11 degree target crown
• 12.5" length
• 1/2-28 TPI muzzle threads
• Thread protector included
• Nitride coated
• 12.5" - 530g (1.17 lbs) total weight
• 16.25" - 655g (1.44 lbs) total weight
• Compatible with all 10/22 receivers.
• Fits all stocks that accept 0.920" bull barrels. Compatible with most factory 10/22 stocks.
• Not compatible with CCI stringers or similar hyper velocity ammo.

From Only: $279.95
---> Click Here To Order From SpectreBallistics.com <---



12.5" barrel installed on a ST-22 rifle.

 

[Pointdexter]

So you guys made the barrels? What are the groups like at 50/100?

 

[SpectreBallistics]

So you guys made the barrels? What are the groups like at 50/100?

We contracted shaw to make the barrels to our specifications. We will be posting groups shortly, but so far sub moa with appropriate ammo is achievable.

 

[sametwinnie]

Pics of grouping? I just ordered one!

 

[SpectreBallistics]

Pics of grouping? I just ordered one!

It's coming. Unfortunately we just haven't had the time to hit the range and shoot some proper groups from a sled and something other than 6 MOA red dot. What I can tell you is for steel challenge the 12.5" is amazing. Super light weight and has great balance. Switching to it took 0.25s on average off my times.

 

[Craig0ry]

if ya send me a barrel I'll do some group testing for ya with some different types of ammo

 

[nitroxace]

SBI just wondering if you were able to get out and do some shooting. I am very interested in seeing some results.

 

[Roog]

Is something like CCI Blazer ok to use with this barrel with the tighter bentz chamber?

 

[stewbud]

Is something like CCI Blazer ok to use with this barrel with the tighter bentz chamber?

I use CCI Blaser with my new barrel and it works very well.

I have about 400 rounds thru my new shorty 10/22 for the steel challenge and it has been flawless and accurate. No failure to feed or extract. It installed easily also.

I cleaned it during the 'break in' period and it is very smooth.

I like mine a lot.

.

 

[GimpyGolden]

Any ETA on restock of these barrels?

 

[G.Mitchell]

I’m looking for a 12.5”, hopefully you’ll have more soon…

 

[FatCatsDad]

Will these fit the standard 10-22 birchwood stock or is a heavy barrel stock needed ?

 

[SpectreBallistics]

Will these fit the standard 10-22 birchwood stock or is a heavy barrel stock needed ?

They do fit the factory stock. We tested with the polymer and basic wood stock.

 

[99Solutions]

I put one of these 12.5” on my 10/22 and boy is it nice. So compact and handy. Put a linear compensator just to direct the noise forward and it’s still short and handy. Just awesome for a little bush hunting rifle and it fits in a pack nicely.

It fires the 40 grains grey-box Blazers just fine. Never tried the other ones.

 

[southern1022]

I’m looking for a 12.5”, hopefully you’ll have more soon…

I am also in the market for one

 

[Jdiep]

I put one of these 12.5” on my 10/22 and boy is it nice. So compact and handy. Put a linear compensator just to direct the noise forward and it’s still short and handy. Just awesome for a little bush hunting rifle and it fits in a pack nicely.

It fires the 40 grains grey-box Blazers just fine. Never tried the other ones.

What's the accuracy like on the 12.5s? Can you still get 1/2" at 50yards?

 

[99Solutions]

I haven’t had the chance to put enough rounds through it yet to present a valid accuracy review. At this point it was easy enough to 1” pine ones at 50 yards while leaning against a tree. But that’s not scientific enough to provide a true range test.

When I do a real range test I’ll put my results on here. In order to do that I need to give it the full chance to perform - proper rest, proper targets, and various lazered ranges, and some rifle specs for context. I’ll report after that happens. For 22 small game hunting at bush ranges I’d never choose to go back to a full length barrel though for future purchases.

 

[southern1022]

I haven’t had the chance to put enough rounds through it yet to present a valid accuracy review. At this point it was easy enough to 1” pine ones at 50 yards while leaning against a tree. But that’s not scientific enough to provide a true range test.

When I do a real range test I’ll put my results on here. In order to do that I need to give it the full chance to perform - proper rest, proper targets, and various lazered ranges, and some rifle specs for context. I’ll report after that happens. For 22 small game hunting at bush ranges I’d never choose to go back to a full length barrel though for future purchases.

Thanks for the update! I'll be watching for the results later

 

[Jdiep]

Thanks I have too many 10/22 receivers,stock and triggers, time to put at least a short barrel one together.