New Toy - B+T SPC9 NR

So far i have had one minor issue - my buffer tube came loose ( from shock / recoil ) i had to:

- remove the buffer ( its very easy, there is a little set screw and all the guts come out )
- heat the castle nut to remove @ loosen the loctite
- hold the stock straight at the index point and re-tighten the castle nut with fresh loctite.

These do not come pinned - whoever torqued mine did not do it enough.

So far it hasn't come loose again.


I won a competition last week with this thing, its a beast


Thiago said:
Thanks for this. It was what I needed to make peace with the cost. Mine is now on the way from Wolverine, ETA Friday.
Will post my perspective coming from a Ruger PCC.
Click to expand...

You probably wont regret it, i have most of the b&t line and they are all the best in class here in canada.
I think the only thing id accept over these would be a premium custom ultralight ar
 
Took mine to the range. Rifle is indeed quite impressive, very happy with mine.
Not crazy with the trigger, not bad at all, just not my style.
Would anyone know if it is AR compatible?
 
Loosethoughts said:
Hi all, don’t mean to resurrect this thread but how does this compare with the GHM9?
Click to expand...

Here my two cents
Those are two very nice PCC They both have the same ambi lower , Ive owned both ,however I bought the ghm9 brand new and I was not satisfied , the folding stock look like a plastic thin jacket hanger I didn’t love the square handguard on it I didn’t put a single round on it I sold it, The Spc9-G cost a liver but dammm its a different animal , come with a aimpoint but I sold it to buy a vortex Uh-1 , I felt in love immediately , This beast looking good , AR charging handle on the back and dual folding charging handle on the handguard , put 200 rounds to the range today and shoot like a dream almost no recoil reliable take glock mag Go get one
 
Donrozon said:
Here my two cents
Those are two very nice PCC They both have the same ambi lower , Ive owned both ,however I bought the ghm9 brand new and I was not satisfied , the folding stock look like a plastic thin jacket hanger I didn’t love the square handguard on it I didn’t put a single round on it I sold it, The Spc9-G cost a liver but dammm its a different animal , come with a aimpoint but I sold it to buy a vortex Uh-1 , I felt in love immediately , This beast looking good , AR charging handle on the back and dual folding charging handle on the handguard , put 200 rounds to the range today and shoot like a dream almost no recoil reliable take glock mag Go get one
Click to expand...

I took your advice, sold the liver, and purchased one ;)
 
Donrozon said:
Congrats:) , TNA should have the reverse fake can back in stock really soon
Click to expand...

Thank you! I’m check in every so often. It’s 1/2x28 for 9mm right? Honestly, with all the extra specs on the can and the brakes, it can get really confusing, and I don’t want to mess it up.

I’m also a bit uncertain with the forward charging handle. It’s pretty much unusable unless you remove the top charging handle, and the top charging handle’s latch prevents it from racking the firearm.

Other than that, it’s all a little stiff so I’ll be working it in daily!
 
Loosethoughts said:
Thank you! I’m check in every so often. It’s 1/2x28 for 9mm right? Honestly, with all the extra specs on the can and the brakes, it can get really confusing, and I don’t want to mess it up.

I’m also a bit uncertain with the forward charging handle. It’s pretty much unusable unless you remove the top charging handle, and the top charging handle’s latch prevents it from racking the firearm.

Other than that, it’s all a little stiff so I’ll be working it in daily!
Click to expand...

Yes it’s 1/2 28 reverse fake can you will also need a crush washer !!
Not sure I understand what’s happening with your both front charging handle ?
 
You must log in or register to reply here.
Back
Top Bottom