Perun X16 - Slovenian Modular Rifle???

[Coffice]

Hey T.I

What you guys think? This could be a VERY cool addition to our market and I know you guys like these kinds of things.

https://www.tinck-ar.com/product/perun-x16-rifle/

https://www.youtube.com/watch?v=_myeLSrC5FA

 

[Elpolliano]

This looks to cool, I think the fact that it's a modified a.r. lower is gonna make it hard to pass as n.r.

 

[Xero]

This would definitely be an AR-15 variant, and thus Restricted regardless of barrel length. It uses a standard AR-15 lower.

 

[Ninja_En_Short]

Looks like what would happen if an AR had hate ### with a SCAR.

 

[Standingtall]

It sure is interesting...

 

[chiken-wing]

The buffer tube is fixed to the upper not a ar variant

 

[S-357]

If it used a proprietary ar lower i coukd see it possibly be nr but the fact that all u need is a standard lower with the tube extension ground off....mind u the lower would no longer fit an AR upper soooooo maybe? Sounds like a grey area... Which if nr id buy in a heart beat

 

[Atman.01]

Yea cost might be a bit of a factor it is listed at 960 USD as just an upper (no barrel) Chasis still needing a few hundred dollars more in parts. There is pretty much zero benefits to this over a Mac Def or otherwise, NR rifle build.

 

[IchBinEinSniper]

Ok...neat. Let's go for NR!

 

[Farmer2285]

I wanna see a 12gauge shotgun built off a ar-102 lower, much like utas did with a ar10 lower, put a little extra r&d into it and make it reliable, I'd buy one for 3 gun!

 

[fenceline]

The buffer tube is fixed to the upper not a ar variant

It uses an AR lower with the buffer tube portion milled off.

Literally an AR lower that has been modified.

They are only selling the upper and carrier. So no classification needed to just bring in those parts.

 

[Standingtall]

Yup, but say a Canadian company wanted to "create" a NR lower for these... could be an interesting addition to the NR market place. That being said, I would snag one in 9mm in a heartbeat even if it was restricted (as long as it takes glock mags)

 

[platnumbob]

That is neat.

 

[DARKSTANG]

If they were available, I would definitely be buying one.

 

[DARKSTANG]

Oh! I'd want the 9mm version. Loved the shorty in the video.

 

[pzkmpfw14]

Any news on this? By the looks of it this would take a lower that is very similar to that of an MRA Renegade, which is essentially an AR lower with the buffer tube lopped off and that already passes as NR.

Oooooooh I'm hopeful we could get this with a locally made lower receiver!

 

[taeish]

I wonder if it'll slap right on the spectre lpc

 

[enefgee]

This would definitely be an AR-15 variant, and thus Restricted regardless of barrel length. It uses a standard AR-15 lower.

Actually, it doesn't. The lower ends without a receiver extension ring, the "receiver extension" is attached to the upper. It isn't any AR lower that I've ever seen. In order to make a lower like this, you're excluding it from functioning with any AR. Mind you, given that slimeball Murray Smith's testimony, a Rem 870 can be considered an AR variant.

 

[kombatkyle]

Actually, it doesn't. The lower ends without a receiver extension ring, the "receiver extension" is attached to the upper. It isn't any AR lower that I've ever seen. In order to make a lower like this, you're excluding it from functioning with any AR. Mind you, given that slimeball Murray Smith's testimony, a Rem 870 can be considered an AR variant.

How does that work?

 

[Dreu0429]

Any updates if this is available in the Canadian market now? And hopefully its a non-res (16" or 18.5")