Lockhart Tactical Raven Platinum Edition, .223 Wylde

Did you have to order the Gen3 upper as an add-on to the regular gen2 upper that comes standard? Are you in possession of 2 uppers now or are they selling the platinum package with the Gen3 replacing the gen2? (I feel I've worded this poorly but hopefully you get what I'm asking haha)
Yes I have two uppers now, and I already had a spare lower.
I just swapped uppers on my gen 2.

So technically if I want the FA to be functional I have two order a gen 3 Bolt Carrier.
 
Finally got out to the range with the Raven .223. Ran perfectly with 55gr. ball and some 62gr I had left. Gas block set at 15 clicks, fed easily and gave a good and consistent ejection pattern. The only things I changed when I received it was to install an Armalite match trigger and Magpul grip from one of my other semis. Also added a Bushnell AR 1-4. Since this was a get to know the rifle thing, I didn't really worry about groups and only shot to 50yds. No muzzle device yet, so now I have to decide which way to go. Time to see what's out there and how much I want to spend.

Very pleased with the fit, finish and function.

P.
 
Just received my Raven .223. Long wait from Lockhart, but worth it because it came with the gen. 3 upper with forward assist, case deflector and port cover. The gen. 3 uppers weren't out when I ordered in May. The gen 3 bolt carrier will come later as I guess they were running behind. On first inspection the fit and finish is very good. I haven't decided on optics or muzzle device yet so that will be the next project. I have things off my other semis for optics and I may opt for a different muzzle break than the ones I have. The trigger is typical heavy G.I. but I will use an ALG I have. Looking forward to a range day in the next week or two.

P.
Did you order it as a gen 2 upper and got the gen 3?
 
Did you have to order the Gen3 upper as an add-on to the regular gen2 upper that comes standard? Are you in possession of 2 uppers now or are they selling the platinum package with the Gen3 replacing the gen2? (I feel I've worded this poorly but hopefully you get what I'm asking haha)
I believe you’ll need to order it separately.

Which being said - ditch all the add ons (except charging handle) and sell the stripped gen 2 upper or keep it as a spare. Sucks that it takes up to 12 weeks just for the gen 3 upper tho
 
Recieved my platinum recently,

Impressed overall. Will need to get it out for shooting this weekend.

The note about the takedown pins potentially getting lost bugs me, as Lockhart will refuse to send you new ones and you’ll have to buy them (at $40-45 before ship, bleh)
 
Recieved my platinum recently,

Impressed overall. Will need to get it out for shooting this weekend.

The note about the takedown pins potentially getting lost bugs me, as Lockhart will refuse to send you new ones and you’ll have to buy them (at $40-45 before ship, bleh)
I don’t know how they would get lost as mine are tighter than a ducks arse
 
Recieved my platinum recently,

Impressed overall. Will need to get it out for shooting this weekend.

The note about the takedown pins potentially getting lost bugs me, as Lockhart will refuse to send you new ones and you’ll have to buy them (at $40-45 before ship, bleh)
My take down pins are tight, but yes, you can push them all the way out with some force. I don't think it's an issue really.

P.
 
Hi. Yes. Ordered in May and by the time mine arrived Lockhart included the Gen. 3 upper instead of Gen. 2. The Gen. 3 carrier was not in stock yet, so I will order that when they are ready.

P.
Would have been nice if they threw in the gen 2 carrier, would have held you over until the gen 3 Carrier were ready
 
Would have been nice if they threw in the gen 2 carrier, would have held you over until the gen 3 Carrier were ready
This is a complete .223 rifle that I got. It has a Gen 2 carrier in it until the Gen 3 are released. Works perfectly. It just doesn't have the forward assist cuts on the carrier and that is the only difference.

P.
 
My take down pins are tight, but yes, you can push them all the way out with some force. I don't think it's an issue really.

P.

This is a complete .223 rifle that I got. It has a Gen 2 carrier in it until the Gen 3 are released. Works perfectly. It just doesn't have the forward assist cuts on the carrier and that is the only difference.

P.
Oh, I misunderstood and thought you ordered a stripped set.
That’s pretty much where I’m at .

I ordered the stripped gen 3 set and swapped it on my platinum rifle.

I’m waiting on the gen three carrier as well, then all I need is another bolt and I’ll have an extra complete set 😆
 
My new Platinum edition of the Lockhart Tactical "Raven" direct-impingement, semi-automatic sporting rifle arrived today. It was in-stock at a Site sponsor and arrived one province over the same week that I ordered it. I have yet to fire the rifle (tomorrow's task), however I must admit that I am quite favourably impressed with what I have examined in detail thus far. My rifle shipped with the updated second-generation Bolt Carrier, so no worries about the cracks that manifested in the too-thin Gen 1 Carriers.

The first thing that struck me out of the box was the quality of the machining, the precise fit of the parts and the flawless Cerakote finish. The precision machining is really quite impressive, with zero evidence of chatter or other tooling marks in the aluminum and steel components. Although there are a couple of sharp edges on the Lower Receiver around the underside of the Trigger Guard, these should not present a problem if you maintain a normal grip. Failing that, a couple of quick swipes with a fine file will knock the potentially annoying sharp points off of the integral Trigger Guard. The rifle's balance is excellent, right in front of the Magazine Well with a mounted LPVO. The front end feels very lightweight, and "alive" in the hands, easily pointing towards whichever direction the rifle's muzzle is driven.

The Raven features several unique aspects that other Modern Sporting Rifles do not, including a scalable Lower Receiver with a removable Magazine Well. The removable Mag Well facilitates the use of different calibres in the Raven. You simply install the Mag Well of your calibre choosing onto the remainder of the Lower Receiver. You then bolt on the caliber-appropriate Upper Receiver and away you go! Multiple calibre options are planned to take advantage of both intermediate rifle chamberings as well as common pistol loads. Another unique aspect of the Raven is its multiple configurations and options for charging the firearm. There is Left-side charging, Right-side charging, and the conventional AR15-style top-charging handle to select from! Controls on the Platinum edition are fully ambidextrous, but are not necessarily interchangeable with standard AR15 controls due to the different contours of the Raven's Receiver set.

The "Platinum" edition of the Raven ships with a hybrid Handguard consisting of a Picatinny rail on top and MLOC slots at the 3, 6 and 9 o'clock positions. It is retained by a push-pin the same as those used to join the Upper and Lower Receivers, the Mag Well and the remainder of the Lower Receiver. The top Picatinny Rail is continuous between the Receiver and Handguard, although there is some minor rotational play in the Handguard that could affect lasers or other precision instruments. This play can be eliminated through the use of a standard AR5 Handguard which clamps to the Barrel Nut, rather than being retained by a push-pin. Note that the push-pins used to assemble and take-down the Raven are not captured and should be carefully retained in a zippered pocket when in the field.

The Gen 2 Bolt Carrier is much beefier than the breakage-prone Gen 1 Carrier. Like the Upper and Lower Receivers, the Bolt Carrier is proprietary, being longer than the standard Carrier employed in an AR15. The complete Bolt, Firing Pin, Cam Pin, etc, are compatible with the AR15 for ease of repair with readily available spare parts. As always, the Trigger-Tech 3.5lb "AR Trigger" is a very worthwhile upgrade, serving as it does to enhance the rifle's accuracy moreso than just about any other components.

Is the Lockhart Tactical Raven with the Gen 2 Bolt Carrier worth the asking price? That depends on what you expect for your hard-earned cash! At $3K (+ extras), the Raven is certainly much more expensive than otherwise comparable AR15 rifles selling for under $1K CAD. That said, the Raven does come with some extras that the bargain-priced AR15s did not include such as the aforementioned calibre quick-change capability. With bargain-priced AR15s being a moot issue in Canada for the time being, the Raven is just about the only viable DI game in town these days, alongside the horribly "fugly" JARD J-180 builder's kit. The Raven is pricey without a doubt, but this appears to be a definite case of getting what you pay for. Is the Raven a worthwhile $3K(+) rifle? Only time will tell for certain, but I am optimistic that the rifle will perform satisfactorily during live-fire testing beginning tomorrow. If the Raven performs nearly as good as it looks, I will be a very satisfied customer. Yes, it costs as much as a Restricted Bren 2, but it is still cheaper than a bunch of other options on the NR Canadian market.

I really like the concept behind the Lockhart Tactical Raven. This is about as close as we can get to an AR15 without the firearm being classed as a variant. As such, it has a definite place within any collection of modern sporting rifles. Assuming a satisfactory performance on the range, I will give the Raven a hearty "buy" recommendation. Tune in tomorrow for my range findings....

Pros:

- Build quality, fit and finish.
- Flexible design (Multi-caliber, 3x charging options)
- Lightweight and balanced, lively in the hands

Cons:

- Price ($3K+)
- Slight play in Handguard (can be replaced with a standard AR15 Handguard)
- Non-Captive Push-Pins easily lost in the field (carry spares in Pistol Grip)



20231020-174027.jpg



20231020-174047.jpg



20231020-174247.jpg



20231020-174255.jpg




My 'Build":

- Griffin Armament Flash-Comp with Gen 1 Blast Diffuser
- Magpul VFG on a KRG QD MLOC Rail section
- Streamlight TLR-1 HL w/ Strobe
- Magpul Gen 3 PMag
- Trigger-Tech 3.5lb AR15 Trigger
- Magpul Pistol Grip
- Generic Polymer BUIS
- B5 SOPMOD Buttstock
- Optional Lockhart Tactical Parts - Extended Take-Down Pins (x2), Left Side Receiver Charging Slot Cover, Brass Casing Deflector
- Trijicon Accupower 1-8X in American Defence QD Cantilever Mount
How’s the rifle holding up almost a year later?
 
Got a chance to take my Raven out. Ran smooth @ 18 clicks.

Recoil impulse makes it feel like a real loud .22 lol. Will definitely be swapping the trigger soon.
 
Got a chance to take my Raven out. Ran smooth @ 18 clicks.

Recoil impulse makes it feel like a real loud .22 lol. Will definitely be swapping the trigger soon.
what muzzle device? Waiting on mine thinking just a flash hider vs my usual PA EFAB
 
Got out for another range day today. Raven ran perfectly. 100 rounds fired. I have added a Surefire Warcomp closed tine and a Warden on top of it. The warden did add a small point of impact shift with some old Winchester .55gr., but I later switched to Remington .55gr., which brought the groups smaller and closer to original zero point. I have some other ammo on order which is .62gr., so I will try that next time. I am happy with it so far.

Current additions, comp and warden, Bushnell AR 1-4, match trigger, Magpul grip. All mags, LAR, H&K, Magpul run perfectly but only LAR and H&K drop free as the magwell in tight.

P.
 
has anyone tried to fix the movement on the 1st gen handguards that are only held by the pin? any easy fix before i replace it with another handguard?
 
Back
Top Bottom