Cdnhunter117
CGN Regular
- Location
- Northern Ontario
So they advertise the weight as much less to sell more units knowing they are deceiving people for profits. Nice.
EGE ARMS LEVAR12S LEVER ACTION 10.6" BLACK WALNUT 12ga Shotgun Non-Restricted
- Thread starter North_Sylva
- Start date
FatCatsDad
CGN Ultra frequent flyer
That's a much better length of pull.I just picked mine up from tenda.. it is pretty big, it looks small on the pics because you think AR15 dimentions.. but its not actually that small, it's a 12 gauge pig.. lol.. and i like it
Also, it's advertised as 2kg,[ 4.5lb] but it's actually 2.8 kg.. 6 lb 5oz.. without the magazine. Fit and finish is great, if polymer lower holds up..
Also, on the synthetic stick version LOP is 14" .. and it's 32.5" over all length.
So the polymer stock is 2" longer than the walnut.
Here is a pic to understand the size. This is beside 9" barrel O/U and 12" AR..
I'd take 14 LOP synthetic over 12 LOP walnut.
Also without a walnut forend it looks unbalanced
Beautiful. I have the exact hand stop, and a HUEY on my walnut version. Those would match my stock perfectly! (Edit: found them on Woox site, ordered!).
Last edited:
Did you order them straight from woox?? Seems they only ship in the US
Hi, I have family in the U.S. they are coming soon so I sent it to their place. Do what Dimitri said and call. If you don't have any U.S. options after calling them DM me and we can discuss if I should pick some up for you and beg for forgiveness from my fam for all they will be bringing
.Much appreciated man, thank you!!Hi, I have family in the U.S. they are coming soon so I sent it to their place. Do what Dimitri said and call. If you don't have any U.S. options after calling them DM me and we can discuss if I should pick some up for you and beg for forgiveness from my fam for all they will be bringing
Cdnhunter117
CGN Regular
- Location
- Northern Ontario
Then it'll get banned.
FYI.....Have not heard anything back about what EGE magazines are available for the Levar12S or what others might be compatible so I took some store points I had with another vendor and got a Charles Daly N4S 3" 12ga 5 shot magazine. It arrived today and I loaded up some 2 3/4" shells to see if it would cycle the rounds. Magazine loaded nice and firm, into the Levar12S, but then when I cycled the bolt back, it would not go forward or engage picking up the first round. I was disappointed but then I looked closely at the magazine and there was a blob of excess paint all along the top back of the magazine (right where the back of the 12ga round sits up against). I easily removed the excess paint and tried again. The magazine worked just fine, I cycled 10rds for practice through the Levar12S no problem. I will hopefully take the Levar12S out to the range this weekend and try the new magazine but it should be fine.
Another observation, wood stock and poly.er are not interchangeable. On the wood stock mounting screw goes in from the bottom of the grip base at a significant angle. While on the plastic stock, the screw is bolted from the back of the grip, almost paralel to the barrel line..
So it looks like i will have to make a custom wood stock for this beast
What is the overall length limit in order to stay non restricted? I find the 14" LOP on the factory stock is few inches too long for me. Considering that I'm not modifying the factory stock, I am making a new one. Was it 26 or 28 inches ??
So it looks like i will have to make a custom wood stock for this beast
What is the overall length limit in order to stay non restricted? I find the 14" LOP on the factory stock is few inches too long for me. Considering that I'm not modifying the factory stock, I am making a new one. Was it 26 or 28 inches ??
26″/660mm OAL.Another observation, wood stock and poly.er are not interchangeable. On the wood stock mounting screw goes in from the bottom of the grip base at a significant angle. While on the plastic stock, the screw is bolted from the back of the grip, almost paralel to the barrel line..
So it looks like i will have to make a custom wood stock for this beast
What is the overall length limit in order to stay non restricted? I find the 14" LOP on the factory stock is few inches too long for me. Considering that I'm not modifying the factory stock, I am making a new one. Was it 26 or 28 inches ??
You suck at Google btw.
Another observation, wood stock and poly.er are not interchangeable. On the wood stock mounting screw goes in from the bottom of the grip base at a significant angle. While on the plastic stock, the screw is bolted from the back of the grip, almost paralel to the barrel line..
So it looks like i will have to make a custom wood stock for this beast
What is the overall length limit in order to stay non restricted? I find the 14" LOP on the factory stock is few inches too long for me. Considering that I'm not modifying the factory stock, I am making a new one. Was it 26 or 28 inches ??
Dimitri, did you verify that they didn't drill both holes in the receiver sets? It doesn't seem to make sense to me that they would manufacture 2 different lines for 2 different stocks.Another observation, wood stock and poly.er are not interchangeable. On the wood stock mounting screw goes in from the bottom of the grip base at a significant angle. While on the plastic stock, the screw is bolted from the back of the grip, almost paralel to the barrel line..
So it looks like i will have to make a custom wood stock for this beast
What is the overall length limit in order to stay non restricted? I find the 14" LOP on the factory stock is few inches too long for me. Considering that I'm not modifying the factory stock, I am making a new one. Was it 26 or 28 inches ??
