500 Round Mag for 10/22 (...yes that's 500!)
- Thread starter Wham-O
- Start date
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
you can use the sorter part of the 10/22 quick loaders, (the detachable shaker) they are super easy to load
blacksmithden
CGN Ultra frequent flyer
With greater volume the cost should be around the $100 mark, with the adapters at about $15,
These being CANADIAN MADE! is only really effecting initial cost with low volume,
KEEP IT CANADIAN!!
Well then, consider me your first CGN pre-order customer then. I'll be the guneapig
Of course, you'll have to remember that I'm a millwright and a mechanic. The first thing I'll have to do is take it apart and possibly make suggestions on how it could be better 
Definitely interested!!
Keeping an eye on this thread.
Keeping an eye on this thread.
With greater volume the cost should be around the $100 mark, with the adapters at about $15,
These being CANADIAN MADE! is only really effecting initial cost with low volume,
KEEP IT CANADIAN!!
ruger 10/22, savage, lakefield, cooey, marlin, right now,
Remington 597!
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
they will be available here on CGN
first!I am waiting for the last parts from production then QC and testing.
I am hesitant on throwing out a date as I it depends on QC and testing, if it is not 100% the parts have to be redone,
I can say "soon". the first production color is black, 2nd is tan, 3rd is green, what do you guys think about clear? and I mean crystal clear!!!
thanks Ryan
video http://www.youtube.com/watch?v=n6vExVhvwPo with some bad ammo
some of the parts are starting to be manufactured this week, some have been postponed by a couple weeks, this may push the date back a bit but not to long,
I noticed the shooters hand moving on the mag after every 5 shots. Do you have to manually apply pressure for the rounds to feed?
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
No you dont have to apply pressure, I was shooting with no bipod holding the drum and actually trying to hit my target, holding the polished aluminum tight my hand would creep up the mag, then I would have to regrip it to be comfortable, I now have a bipod and it is much better!!
blacksmithden
CGN Ultra frequent flyer
they will be available here on CGN
I am waiting for the last parts from production then QC and testing.
I am hesitant on throwing out a date as I it depends on QC and testing, if it is not 100% the parts have to be redone,
I can say "soon". the first production color is black, 2nd is tan, 3rd is green, what do you guys think about clear? and I mean crystal clear!!!
thanks Ryan
Added you as a friend just in case something magically happens to this thread. Just let me know where and when and I'll be there with cash in hand.
I want one....it was designed in Canada....it was designed by a Canadian........it's being built in Canada. There's just no downside to this.
blacksmithden
CGN Ultra frequent flyer
Bumb. Need to keep this one fresh. I've got a brand new 10/22 that needs the barrel burnt out
ruger 10/22, savage, lakefield, cooey, marlin, right now,
CZ 452, just because I think it would be hilarious to have a bolt gun with a huge drum magazine
But seriously, I would buy one. The magazines are like $40 for a 10 round. This is way better $/fed round.
Jwirecom109
CGN Ultra frequent flyer
- Location
- Rural Alberta
yea it is interesting but the size is an issue. Maybe if it was a double drum mag like for the AR15 it would be more interesting
rkwprobuilt
Member
- Location
- Lethbridge, ab canada
did I mention that size drum in the video actually will hold 200 rounds
did I mention that size drum in the video actually will hold 200 rounds
Cool, but totally impractical. A 10/22 should not be a crew-served weapon. Hmmm, maybe you could make it a combo bipod-magazine.
