Precision/Sniper/Tactical

Fenix.NZ said:
stock shape and barrell profile are also different - in saying that i do see where you got the comparison
Click to expand...
Upon further review, I stand corrected :redface:


drache said:
Like I said... it looks like it says Savage on the bolt :D
Click to expand...

thanks for the picture of the bolt! clears things up

here's the actual rifle!
carb.jpg


We need details on the said rifle!!!! :)
 
Its a Savage PC10;) Sub .25moa at a 100yards as my best so far with factory ammo. Wonder how the Mossberg shoots:D

Edit to add details- .308 with a 20" barrel. Stock accu-trigger and stock with a Farwell 20moa base and US optics rings and a Bushnell 4200Tactical scope.
 
Time to resurrect this thread.

This rifle took me to a third place finish in F Open at the 2010 PGW Defence Western Canada F Class Championship.

Action: PGW Coyote single shot
Barrel: Krieger 7mm 32" 1:8" twist 17A contour
Trigger: Jewell HVR set to 14 oz.
Stock: Robertson GBF
Rest: SEB co-axial front rest and SEB rear bag
Calibre: 7mm-300 WSM
Weight: 21.1 lbs
Brass: Winchester
Primers: Federal GMM 215
Bullet: 180 Berger VLD
Powder: Reloder 25
Scope: Schmidt and Bender PMII 12.5x50x56, Sport fine reticle

Gun built by PGWDTI.
Recently re-barreled and tweaked by Mick McPhee

A photo of the gun on the line at the US F class Nationals at Sacramento, California earlier this year.
IMG_0162.jpg
 
DSC02350.jpg


DSC02360.jpg


DSC02359.jpg


DSC01708.jpg


DSC01704.jpg


DSC01705.jpg



Rem 700 SPS factory .308 action
20" Rem SPS Tactical factory bull barrel
Bell & Carlson light tactical stock with full aluminum block and fiberglass action bedding
TacPro Cheek Rest
Timney Trigger
Tactical Ordnance tactical bolt knob
Coretac modified Harris bi pod bolts, swivel adjuster and Phoenix system with rubber feet
Falcon Menace 14X tactical scope with BC flip up caps
Leupold Mark 4 two piece steel mounts
TPS Aluminum low Rings
Accu-Shot monopod with quick knob and tac-cap
 
Last edited:
DSC_0054.jpg


Ok, maybe if I post it I won't tear it apart every few days to try to upgrade:

Calibre: .308win
Action: Factory Remington 700 (From a 700P)
Barrel: Factory Remington 700 (From a 700P)
Stock: Bell and Carlson Medalist A5 (skim bedded)
Trigger: Jewel HVR set to 2lbs
Base: Near -25
Rings: TPS low (with additional anti-cant device)
Scope: Leupold VXIII 6.5-20x50mm
Bipod: Sinclair F-Class

Current load:
Bullet: 175 SMK
Brass: Neck sized Lapua
Powder: Varget
Primer: CCI 200
Charge: 44.5grains
Velocity: 2650fps

Recent result: 11th place at PGW 2010

Next offseason improvement: Shilen match barrel
 
:slap: you know we all want details on those prue ### machines "headdamage" so please please give us some details and some more pics if you gottem.:eek::ar15:
 
You must log in or register to reply here.
Back
Top Bottom