Benelli supernova tactical

Just picked up a 14inch collapsible, sweet gat. Although detail stripping is a pain in the #### has anyone taken of the stock yet to remove the trigger pack/ how do u go about it ?
 
It would probably be cheaper to sell ur super nova and buy a tactical.

Also does anyone know where i can a mesa side saddle or a +1 mag extension for my supernova?
 
Last edited:
winnipegger said:
Just picked up a 14inch collapsible, sweet gat. Although detail stripping is a pain in the #### has anyone taken of the stock yet to remove the trigger pack/ how do u go about it ?
Click to expand...

Follow the instructions up till you get to that step, then loosen the round nut with the holes on the stock and back it off till the trigger group can drop out. Its pretty easy to strip actually.
 
supernova said:
GP Tactical have the Mesa side saddles, Brownells would be able to get you a +1 extension but it may extend past the muzzle.
Click to expand...

Hmm I couldn't find a +1 on brownells, I called briley today they said it'd be about a hundred bucks for a custom one but they can't ship OCONUS
 
Okay for anyone who cares or doesnt want to #### up their gun a 4.5mm Allen key and a t27 torx bit fit 100% in the holes of the collapsible stock lock ring and do not slip out, stripping is now a breeze I'm gonna keep an emergency set of two 4.5mm Allen keys taped inside the butt stock cavity. Way easier to strip then an 870
 
winnipegger said:
Okay for anyone who cares or doesnt want to f**k up their gun a 4.5mm Allen key and a t27 torx bit fit 100% in the holes of the collapsible stock lock ring and do not slip out, stripping is now a breeze I'm gonna keep an emergency set of two 4.5mm Allen keys taped inside the butt stock cavity. Way easier to strip then an 870
Click to expand...

Agreed, does anyone here know how to dissassemble the bolt? I noticed theres a pin but I didn't want to try punching it out till I know its safe or what the procedure is.
 
Picked one of these a month ago, put a 100 rnds of 2-3/4 target load through it at clays. Works like a charm! Absolutely love this shotgun
 
M14S said:
How does one mount a light on this, except maybe on the top scope rail?
Click to expand...

I've been thinking of taking a short section of rail from a Magpul RVG and drilling through the very front of the handguard right in the middle, and then using a light like a Surefire X300 or a TLR1 or something, as they are nice and small. Might need a shim to make it point strait forward though....

If I can ever get the thing fully field stripped (AKA take the bolt out so I can get at the action bars and remove the pump!) I will mess around with it and see if i can get something to work.
 
Cool, I'll stay tuned. I've also found this on my research, which I think mount somewhere at the front end of action/ magazine tube., if it's compatible:

http://www.brownells.com/.aspx/pid=44716/Product/Benelli-BLAM-Light-Mounts

Others seems mount on at the front of the action/ magazine tube as well, but only on extended ones:

http://www.brownells.com/.aspx/pid=44716/Product/Benelli-BLAM-Light-Mounts
 
M14S said:
Cool, I'll stay tuned. I've also found this on my research, which I think mount somewhere at the front end of action/ magazine tube., if it's compatible:

http://www.brownells.com/.aspx/pid=44716/Product/Benelli-BLAM-Light-Mounts

Others seems mount on at the front of the action/ magazine tube as well, but only on extended ones:

http://www.brownells.com/.aspx/pid=44716/Product/Benelli-BLAM-Light-Mounts
Click to expand...

You might be able to sammich one of those between the mag tube end cap and the mag front mag tube hanger, but I'm not sure if the mag cap would stay put without the detent. Otherwise I'm not sure if that would really fit anywhere.

I wonder how difficult it would be to make a little rail section that attaches to the front sling point? Would keep it out of the way and be on a solid area.



I do have a new magpul RVG coming this week sometime, so I'll have a new little section of picatinny rail to play with. I just need to find a tool to loosen the pistol grip nut to fully field strip the gun!
 
1020001639b-1.jpg


Nordic mag clamp with rail, Vltor offset QD mount, Fenix TK-12R5


Then theres a few options from CDM Gear from SFRC:
http://www.theammosource.com/index.php?main_page=index&cPath=14_193
 
You must log in or register to reply here.
Back
Top Bottom