Grizzly Mag #### thread

P

pavmentsurfer

CGN frequent flyer
Rating - 100%
346   0   0
Location
Minden
I used the search function and didnt find a thread dedicated to showing off ALL sizes of Magfed Grizzly or Norinco mag fed pumps. So, I thought id start one.

If there is already a thread like this, just disregard this one. I wont notice since im clearly blind.

It would be best if we kept this to JUST Mag fed DA's and Norcs... everyone likes to show off ALL their hardware but there are other places for the rest of it. Also, this isnt a "your gun is ugly" thread. If you dont have something nice to say, dont say anything. Its an easy rule to live by for most of us.

Heres mine:

NEA grip and stock adapter with Commercial spec tube and Magpul stock.
Promag Archangel forend with custom added rail and Magpul AFG1
4 round side saddle (cant remember the brand)

Overall collapsed length is just a hair over 29 inches but fully extended is totally comfortable and ergonomically correct for using the sights. This gun never jams if you run it like you stole it but only feeds 2 3/4's... 3"s jam almost every round.

Im seriously considering armocoating the receiver and lower tube FDE... but not %100 sure on that one.




I think this gun is in serious need of a happy cap.
 
Here's mine:

E39FDB4B-5805-4EE7-AE50-8F3FE9847DD1-722-00000066D0E69389.jpg
 
I'm curious why you guys are putting side saddles on your mag fed? Can you port feed this gun?

I just got mine and realized the empty mags will hold the bolt open, so I assumed it couldn't be port fed.
 
To reload the mag if you needed to. Thats why I did it.

If you hold the gun upside down and drop a shell in it will load into the chamber, then insert the mag and you have 6 rounds. Its really quite easy and fast.
 
I just bought a grizzly mag with 12.5 barrel. Its jamming both 2 3/4 and 3 inch shells. I use it for camping protection and its no good to me if it can't cycle good. Does any body have this problem or any ideas how I can fix it. I really want to keep this gun bit if it can't cycle properly I will have to sell or return it. Plz help !
 
Get some headphones, and popcorn. Chose an action/war movie you always wanted to see, or see again.
Make sure it's unloaded, and depressing the disconnect, cycle the action dry until the movie is over.
It just needs to wear in. Should fix it up, if not Chris will exchange it for you I'm sure.

It's going to be loud, so crank up the phones.
 
Jbo450 said:
I just bought a grizzly mag with 12.5 barrel. Its jamming both 2 3/4 and 3 inch shells. I use it for camping protection and its no good to me if it can't cycle good. Does any body have this problem or any ideas how I can fix it. I really want to keep this gun bit if it can't cycle properly I will have to sell or return it. Plz help !
Click to expand...
Sorry to the OP, I know this is a pic thread. My Grizz is stamped 2 3/4". Im not sure what yours says but id cut out the 3" and mine took half dozen or more mags to break in and then cycled fine. And be firm when chambering a round.
 
You must log in or register to reply here.
Back
Top Bottom