Page 1 of 3 123 LastLast
Results 1 to 10 of 26

Thread: 2015 SHOT Show: Ruger 10/22 fast loading magazine

  1. #1
    Moderator tootall's Avatar
    Join Date
    Jun 2005
    Location
    BC
    Posts
    11,872

    2015 SHOT Show: Ruger 10/22 fast loading magazine

    As much as I like the Ruger 10/22 rifle, I find the mags a colossal pain in the thumb.
    HCMags ( .hcmags.com ) has an answer to that problem.
    The magazine has a stripper clip sort of thing that inserts into the rear of the main body.
    The spring is compressed by forcing down a small knob (silver thing at the bottom of the mag in the first photo), and locking it in place.
    Then insert the stripper clip into the rear of the mag (People that use the term mag and clip interchangeably are going to be screwed!), release the knob holding the spring, and you are ready.
    The clip stays with the mag body, and holds 20 rounds. The mag can then topped up with an additional 5 rounds, for a total of 25. (These five are within the last top inch of the mag and are not accessible by the clip method)
    The basic kit comes with one mag body and two clips.




    This view shows the rear access with clip removed.

    There is also a deluxe kit with one mag, five clips, and a sorting box that will quickly sort out 100 rounds into the 5 clips.



    This shows the sorting box out of it's container. Once the 100 rounds are divided into 5 rows of 20, the clips are slid onto the row of rounds, row by row.

    The package makes NO mention of the Challenger pistol. I think I will let them know NOT to completely Foock up their Canadian market.

  2. #2
    CGN Regular willywonka519's Avatar
    Join Date
    Jan 2008
    Location
    Alliston, ON
    Posts
    416
    I think we have these up here already. Didn't work too well with my 10/22...lots of jams..

  3. #3
    BANNED
    Join Date
    Jul 2012
    Location
    West Quebec
    Posts
    97,973
    Too bad would of liked to try one out

  4. #4
    CGN Regular willywonka519's Avatar
    Join Date
    Jan 2008
    Location
    Alliston, ON
    Posts
    416
    They might work better through a factory barrel.....my aftermarket barrel has a pretty tight chamber. This may have contributed to the FTFs I experienced.

  5. #5
    Member
    Join Date
    Oct 2004
    Location
    Stony Plain, Alberta
    Posts
    49
    Yep, these are already up here

  6. #6
    CGN frequent flyer Allstone's Avatar
    Join Date
    Aug 2007
    Location
    BC
    Posts
    1,425
    Up here for a while now...been a number through the EE.

  7. #7
    CGN Ultra frequent flyer deagle2008's Avatar
    Join Date
    Apr 2010
    Location
    BC
    Posts
    2,147
    They are #### dont buy. To many jams

  8. #8
    Moderator tootall's Avatar
    Join Date
    Jun 2005
    Location
    BC
    Posts
    11,872
    I didnt realize they are already out. I thought it was a new item.
    Thanks for letting me know.

  9. #9
    CGN Regular Marilius's Avatar
    Join Date
    May 2012
    Location
    Edmonton
    Posts
    503
    I had 2. They fed flawlessly when I had a stock 10/22. When I upgraded to a Dlask barrel (sporter chamber!) and receiver, the first 15 rounds would jam, then rest would cycle properly. I EEed em.

  10. #10
    CGN Ultra frequent flyer RobertMcC's Avatar
    Join Date
    Mar 2004
    Location
    Martimes
    Posts
    7,136
    I like my BC steel lips and BC loader. All I need to do is shake and turn a knob.

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •