Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 49

Thread: Cadex MX1 Muzzle Brake (Made in Quebec)

  1. #21
    CGN Ultra frequent flyer Kevin M.'s Avatar
    Join Date
    Jan 2009
    Location
    Edmonton, Alberta
    Posts
    10,024
    Would be nice to see a comparison between your brake and a few competing models on the same rifle with a setup to allow the rifle to recoil freely and be measured.

    Two different rifles/ calibers, with shooters behind them, and different canera angles doesn't really show that this is "the ultimate recoil mitigation for my rifle", just that you have a quality brake, but it's a big statement without showing the customer some actual comparative tests. Every company nowadays seems to be selling the best brake since sliced bread. Don't get me wrong, I love the looks of it, and that it is Canadian made, but I'd just like a bit more info about it before laying down that kind of cash on a brake.
    You know you are a real gunnut when you start practicing trigger control on power tools.

    WWJMBD? What Would John Moses Browning Do?

  2. #22
    CGN Regular gosse's Avatar
    Join Date
    Jul 2011
    Location
    Montreal
    Posts
    440
    Can I get one in 11/16x24TPI for my .450 Bushmaster (with properly sized bore)? Siouplait les gars XD
    -gosse

  3. #23
    CGN Regular Cadex Defence's Avatar
    Join Date
    Feb 2015
    Location
    St-Jean-sur-Richelieu, Quebec
    Posts
    842
    Quote Originally Posted by gosse View Post
    Can I get one in 11/16x24TPI for my .450 Bushmaster (with properly sized bore)? Siouplait les gars XD
    Sorry, it won't happen... at least for the moment.
    Cadex Customer Service Representative(s)
    1-888-348-6774
    customerservice@cadexinc.com
    https://www.cadexdefence.com/

    For any emergency please contact:
    Patrice Picard
    Sales Director

    514-821-7983
    patrice@cadexinc.com

  4. #24
    CGN Regular gosse's Avatar
    Join Date
    Jul 2011
    Location
    Montreal
    Posts
    440
    Come on, I'll let you try it :P
    -gosse

  5. #25
    CGN Regular Cadex Defence's Avatar
    Join Date
    Feb 2015
    Location
    St-Jean-sur-Richelieu, Quebec
    Posts
    842
    Quote Originally Posted by Kevin M. View Post
    Would be nice to see a comparison between your brake and a few competing models on the same rifle with a setup to allow the rifle to recoil freely and be measured. Two different rifles/ calibers, with shooters behind them, and different canera angles doesn't really show that this is "the ultimate recoil mitigation for my rifle", just that you have a quality brake, but it's a big statement without showing the customer some actual comparative tests.
    The setup that you are describing would request a lot of time, equipment and money. I agree that it would be great to compare them on video and we might do a comparison when we'll have spare time but for now we are too busy at the shop for that.

    We have done our homework while designing our brake and for the rest we'll leave that to some magazine writers, at least for the moment.

    Best regards
    Cadex Customer Service Representative(s)
    1-888-348-6774
    customerservice@cadexinc.com
    https://www.cadexdefence.com/

    For any emergency please contact:
    Patrice Picard
    Sales Director

    514-821-7983
    patrice@cadexinc.com

  6. #26
    CGN Regular Cadex Defence's Avatar
    Join Date
    Feb 2015
    Location
    St-Jean-sur-Richelieu, Quebec
    Posts
    842
    Quote Originally Posted by YoungPUP View Post
    It says they are for .30 cal, any plans on making them for the smaller calibers? I would love to put one on my 22-250 mostly just for looks.
    Perfect, then if it's just for the look install this one.

    As an example, our muzzle brakes are drilled for 33 calibers and they perform amazingly for a 30 cal too. You could never see the performance difference even if it was drilled for a .22 caliber.

    This brake would work for your 22-250 Rem even if there not much recoil to remove on that caliber.

    Best regards
    Cadex Customer Service Representative(s)
    1-888-348-6774
    customerservice@cadexinc.com
    https://www.cadexdefence.com/

    For any emergency please contact:
    Patrice Picard
    Sales Director

    514-821-7983
    patrice@cadexinc.com

  7. #27
    Newbie YoungPUP's Avatar
    Join Date
    Feb 2009
    Location
    ON
    Posts
    28
    Quote Originally Posted by Cadex Defence View Post
    Perfect, then if it's just for the look install this one.

    As an example, our muzzle brakes are drilled for 33 calibers and they perform amazingly for a 30 cal too. You could never see the performance difference even if it was drilled for a .22 caliber.

    This brake would work for your 22-250 Rem even if there not much recoil to remove on that caliber.

    Best regards
    So what you're telling me is that having the hole at .30 will in no way harm the accuracy of my rifle? I mean I do like the look but I don't want to sacrifice accuracy.

  8. #28
    CGN Regular Cadex Defence's Avatar
    Join Date
    Feb 2015
    Location
    St-Jean-sur-Richelieu, Quebec
    Posts
    842
    Quote Originally Posted by YoungPUP View Post
    So what you're telling me is that having the hole at .30 will in no way harm the accuracy of my rifle? I mean I do like the look but I don't want to sacrifice accuracy.
    The muzzle brake itseft won't affect the accuracy by having a .30 hole. However, the addition of a muzzle brake on any rifle will influence the barrel wip due to its weight so you may or may not have to fine tune your ammo to a optimum performance. This is the same for any muzzle brake, flash hider or suppressor that you screw on a barrel.

    Best regards
    Cadex Customer Service Representative(s)
    1-888-348-6774
    customerservice@cadexinc.com
    https://www.cadexdefence.com/

    For any emergency please contact:
    Patrice Picard
    Sales Director

    514-821-7983
    patrice@cadexinc.com

  9. #29
    CGN frequent flyer MIRAMICHIER's Avatar
    Join Date
    Dec 2010
    Location
    Miramichi,Nb
    Posts
    1,610
    Hey Cadex how but some Bolt on Muzzle Brakes any in the making.Thanks

  10. #30
    CGN Regular Cadex Defence's Avatar
    Join Date
    Feb 2015
    Location
    St-Jean-sur-Richelieu, Quebec
    Posts
    842
    Quote Originally Posted by MIRAMICHIER View Post
    Hey Cadex how but some Bolt on Muzzle Brakes any in the making.Thanks
    We do not plan on making clamp on muzzle brakes for the moment. Sorry.
    Cadex Customer Service Representative(s)
    1-888-348-6774
    customerservice@cadexinc.com
    https://www.cadexdefence.com/

    For any emergency please contact:
    Patrice Picard
    Sales Director

    514-821-7983
    patrice@cadexinc.com

Page 3 of 5 FirstFirst 12345 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •