$vboptions[bbtitle]

Page 8 of 8 FirstFirst 12345678
Results 71 to 79 of 79

Thread: G9 Mag Adaptor, Pics and Installation thread

  1. #71
    Business Member MagWedge Industries's Avatar
    Join Date
    Feb 2014
    Location
    BC Lower Mainland
    Posts
    868
    Quote Originally Posted by PECHENEG View Post
    Turned the spring the other way around and it is significantly better, now the front of the cartridge is pushed upwards

    But, the mags bow, what do you guys with bowing XCr mags, my theory is that spring is extreme tension, do you cut 1- 2 spring intervals? What kind of mags are these if they bow?

    Also noticed that 9 rounds and less is functioning much better than 10 which is always a FTF

    Well, anyways, tried dry runs only, hot run is tomorrow

    Got the bolt hold open latch to work, by just filing another 0.1-0.3 mm in the front lip... as people say that front lip is the KEY. The instruction manual MUST start with that FRONT LIP in bold and huge letters
    We cannot recommend alteration of any pistol magazine to fit a rifle, sorry ... I suspect this is illegal to do in Canada.

    There are your bold letters, lol.

    The front lip of the magazine is indeed important, but as I have often informed people the correct way to deal with the front lip is too cut a groove across the underside of the bolt where it will make contact with the front lip.

    Please see the bolt mod info and pics posted earlier in this thread.
    Last edited by MagWedge Industries; 08-30-2017 at 12:24 AM.
    SKS KwikRail 2.5 here at last!!!

    Now with free KwikPin!!!


    $59.95




    MagWedge.com

  2. #72
    Business Member MagWedge Industries's Avatar
    Join Date
    Feb 2014
    Location
    BC Lower Mainland
    Posts
    868
    Quote Originally Posted by aogun View Post
    Having the same issue with mine. Am not as handy as some others, so could post a picture indicating where you shaved the front lip? Thanx
    If you review this thread you will find it near the beginning.

    There is a description and pics.
    SKS KwikRail 2.5 here at last!!!

    Now with free KwikPin!!!


    $59.95




    MagWedge.com

  3. #73
    HELP! I sold my soul to the internet Canuck44's Avatar
    Join Date
    May 2004
    Location
    Terrace, B.C.
    Posts
    8,382
    My Mags are falling out after being seated properly. I shoot a few rounds then out they come. Cures or thoughts?

    Take Care

    Bob

    Suffer the fools with grace...God made enough of them

  4. #74
    Business Member MagWedge Industries's Avatar
    Join Date
    Feb 2014
    Location
    BC Lower Mainland
    Posts
    868
    Typically this indicates that the inletting is not quite right and requires some adjustment. If you still have my number give me a call. If not, email me for my number ...
    SKS KwikRail 2.5 here at last!!!

    Now with free KwikPin!!!


    $59.95




    MagWedge.com

  5. #75
    CGN Regular PECHENEG's Avatar
    Join Date
    Dec 2014
    Posts
    599

    SKS-MW G9, first impressions
    75m, 7x7in target. Unfortunately camera fell down on shots ##2-6

  6. #76
    CGN Regular JVFriday13th's Avatar
    Join Date
    Dec 2016
    Location
    GVRD
    Posts
    103
    Quote Originally Posted by Canuck44 View Post
    My Mags are falling out after being seated properly. I shoot a few rounds then out they come. Cures or thoughts?

    Take Care

    Bob
    The little arm that releases the magazine can probably be tightened up another full turn on the threaded bolt. I had the same issue with mine and did one more full turn and it's been good ever since.

  7. #77
    HELP! I sold my soul to the internet Deckard's Avatar
    Join Date
    Mar 2004
    Location
    The Gulag, chopping rotten wood
    Posts
    20,683
    Where can we buy these?
    "I'll pay even more!" Says nobody in the real world.

  8. #78
    Business Member MagWedge Industries's Avatar
    Join Date
    Feb 2014
    Location
    BC Lower Mainland
    Posts
    868
    Quote Originally Posted by Deckard View Post
    Where can we buy these?
    We ran out and did not replace given the rumours surrounding new possible legislation.

    We may make another run as it seems the government is putting off new gun control measures until next year.

    We are working on a G3 now, which uses a modified Tapco mag and requires no modification of the rifle to install.

    Our G3 should be an improvement over what is commonly available, and as per our G9 are making them with the permission and cooperation of the original maker.
    SKS KwikRail 2.5 here at last!!!

    Now with free KwikPin!!!


    $59.95




    MagWedge.com

  9. #79
    Business Member MagWedge Industries's Avatar
    Join Date
    Feb 2014
    Location
    BC Lower Mainland
    Posts
    868
    we have a handful of old stock that needs finishing that may come up for sale, keep an eye open here and the website
    SKS KwikRail 2.5 here at last!!!

    Now with free KwikPin!!!


    $59.95




    MagWedge.com

Page 8 of 8 FirstFirst 12345678

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •