We are a stocking dealer for Possum Hollow Bore guides! We are slowly increasing our selection of
in stock bore guides for the most popular actions, but since they make them for over 250 cartridge and action combinations, we cant stock them all!
Possum Hollow BORE GUIDES are machined from a solid piece of Delrin®. This material is 100% solvent resistant. Bore Guides are designed to align the cleaning rod with the center of the rifles bore. This insures that no damage can be done to your rifle barrel, cleaning rod, or bolt face by a jag or brush.
The easiest and safest way to preserve the accuracy of your bolt action rifle is to clean your rifle from the breech/chamber end using a Bore Guide.
Almost all Bore Guides, with the exception of Rimfire Bore Guides are designed with a snout that extends into the chamber. This snout has a silicone “O” ring that seals off the chamber. This insures that no solvent can run back into the action or trigger. For optimum performance add an optional integrated or separate Solvent Port.
If you have never used a bore guide before, you don't know what your missing!
A couple of videos of Eric Sinclair using the bore guides to give you an idea of the quality of these, and the reasons to use them!
Click here to see our Application Chart for more specific application information
A few examples below of in-stock bore guides. All bore guides are currently priced at $24.95.
#62 Anschutz Match 54 & 1827 Fortner .22lr
#92 CZ 452, 453, 455 .22lr
#19 AR-15 5.56mm NATO/223 Remington
#10 Cooper 38, Kimber 84, Sako Vixen L46, L461 .22lr & 6mm PPC, 220 swift
in stock bore guides for the most popular actions, but since they make them for over 250 cartridge and action combinations, we cant stock them all!
Possum Hollow BORE GUIDES are machined from a solid piece of Delrin®. This material is 100% solvent resistant. Bore Guides are designed to align the cleaning rod with the center of the rifles bore. This insures that no damage can be done to your rifle barrel, cleaning rod, or bolt face by a jag or brush.
The easiest and safest way to preserve the accuracy of your bolt action rifle is to clean your rifle from the breech/chamber end using a Bore Guide.
Almost all Bore Guides, with the exception of Rimfire Bore Guides are designed with a snout that extends into the chamber. This snout has a silicone “O” ring that seals off the chamber. This insures that no solvent can run back into the action or trigger. For optimum performance add an optional integrated or separate Solvent Port.
If you have never used a bore guide before, you don't know what your missing!
A couple of videos of Eric Sinclair using the bore guides to give you an idea of the quality of these, and the reasons to use them!
Click here to see our Application Chart for more specific application information
A few examples below of in-stock bore guides. All bore guides are currently priced at $24.95.
#62 Anschutz Match 54 & 1827 Fortner .22lr
#92 CZ 452, 453, 455 .22lr
#19 AR-15 5.56mm NATO/223 Remington
#10 Cooper 38, Kimber 84, Sako Vixen L46, L461 .22lr & 6mm PPC, 220 swift
Last edited:
