Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Magpul PMAG® 10 7.62 AC™ – AICS SHORT ACTION 7.62X51MM NATO, now shipping in Canada!

  1. #1
    Expired Industry Member
    Join Date
    Jan 2015
    Posts
    734

    Magpul PMAG® 10 7.62 AC™ – AICS SHORT ACTION 7.62X51MM NATO, now shipping in Canada!

    Thats right, these bad oscars are now shipping to dealers across Canada! Contact any of these fine retailers to get your paws on these while the first batch lasts!

    A larger-capacity variant of the proven PMAG 5 7.62 AC, the PMAG 10 7.62 AC is a reliable and durable polymer magazine for .308 Winchester based family of cartridges.
    Compatible with short action AICS-spec bottom metal to include the Bolt Action Magazine Well for the Hunter 700 Stock, the PMAG 10 7.62 AC brings additional capacity in an affordable and reliable package. Featuring GEN M3™ technology, a paint-pen dot matrix for visual identification, and a flared base plate for positive control and ease of retrieval, the PMAG 10 7.62 AC sets a new standard for bolt action magazines.
    Name:  GetImage.jpg
Views: 1178
Size:  15.2 KB
    Phoenix range
    Tier one armoury
    Wanstalls
    Milarm
    Canadian tactical cowboy supplies
    Wild west shooting centre
    Elwood Epps
    Canada ammo
    Bartons big country
    Italian sporting goods
    Destination plein air
    Red deer shooting centre
    Saskatoon gun works
    Hi calibre services
    Reliable gun
    Wolverine supplies
    Lever arms
    Bulls eye london
    CRAFM
    pavillon chasse et peche
    Jo Brook



    Made in the USA

    FEATURES
    Compatible with short action AICS (Accuracy International Chassis Systems) pattern bottom metal and cartridges built on a 0.470" case head such as 7.62x51/.308 Winchester, 7mm-08 Remington, 6.5mm Creedmoor, .260 Remington, .243 Winchester, and others*
    Accepts a cartridge overall length of up to 2.86"
    Next-generation impact and crush resistant polymer construction
    Self-lubricating follower for increased reliability
    Long life stainless steel spring
    Paint pen dot matrix panels on the bottom of the body to allow for identification marking
    Flared floorplate aids magazine handling and is easy to disassemble for maintenance

    *NOTE: Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington, .300 AAC Blackout, etc. or larger short action magnums. In addition, due to the wide variety and potential combinations of aftermarket receivers, stocks, chassis, and bottom metal that accept AICS pattern mags, minor fitting may be required. Not compatible with Accuracy International AE rifles.
    Last edited by Gravel Agency; 05-06-2016 at 11:43 AM.

  2. #2
    Super GunNutz 9mmGunGuy's Avatar
    Join Date
    Jun 2013
    Location
    S. Ontario
    Posts
    3,953
    Do these mags fit the Ruger Precision Rifle in .308 Win?
    CSSA/CCFR MemberAn unjust law, is no law at all.Martin Luther (1483-1546)
    There may be times when we are powerless to prevent injustice, but there must never be a time when we fail to protest. Elie Wiesel

  3. #3
    CGN Regular
    Join Date
    Mar 2014
    Posts
    185
    The more important question - will they be pinned to 5 rounds?

  4. #4
    CGN Ultra frequent flyer Brordo's Avatar
    Join Date
    Aug 2008
    Location
    BC
    Posts
    3,193
    Don't need to be pinned...it's for a bolt action
    μολὼν λαβέ

  5. #5
    CGN frequent flyer
    Join Date
    Jan 2010
    Location
    Maple Skids, BC
    Posts
    1,823
    Not necessarily true: The magazine must be DESIGNED for a bolt action gun.

  6. #6
    Super GunNutz bacardi's Avatar
    Join Date
    Nov 2008
    Location
    On your 6
    Posts
    2,921
    Do they fit FN SPR A5M rifle?

  7. #7
    CGN Regular
    Join Date
    Jul 2012
    Location
    Vancouver
    Posts
    111
    I dont think Accuracy international makes anything other than bolt guns....so the mags would be designed for a bolt gun, no?

  8. #8
    CGN Ultra frequent flyer Brordo's Avatar
    Join Date
    Aug 2008
    Location
    BC
    Posts
    3,193
    Gobc is right...I should have been more clear...as these are designed for their Hunter 700 stock (which are for bolt actions) and are compatible with AICS bottom metal, no pinning needed.
    μολὼν λαβέ

  9. #9
    CGN Ultra frequent flyer Max Owner's Avatar
    Join Date
    Jan 2005
    Location
    Displaced From South Western Ontario, To GP, Alberta. And back again...... And again.
    Posts
    12,762
    Do they fit anything else?
    Shooter and Collector (kinda)

    Never Forget Best Friends.

    Aug 30, 2008.
    Dec 29, 2008.

  10. #10
    CGN frequent flyer
    Join Date
    Oct 2011
    Location
    Vancouver
    Posts
    1,612
    Link to the web site ???

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •